Yim — Minecraft · MIT App Inventor · Micro:bit
265 sessions · Minecraft Education, MIT App Inventor & Micro:bit · Tue / Sat / Sun · 90 minutes each · 17 Nov 2026 – 21 Nov 2027 · 397.5 hours total.
Showing 265 of 265 sessions
Session 1Plan village on paper, build house 1Tuesday 17 Nov 2026
Date: Tuesday 17 Nov 2026, 15:30–17:00 (90 min) | Unit: M1 Village & Farm | Topic: Plan village on paper, build house 1
Learning objective: By the end of this session, Yim can plan village on paper, build house 1 — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Plan village on paper, build house 1." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Plan village on paper, build house 1" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Plan village on paper, build house 1". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The plan village on paper, build house 1 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Finish the paper plan — draw / list the next 3 steps for the next session.
Session 2Designer - first screen, button + labelSaturday 21 Nov 2026
Date: Saturday 21 Nov 2026, 15:30–17:00 (90 min) | Unit: A1 First Apps | Topic: Designer - first screen, button + label
Learning objective: By the end of this session, Yim can designer - first screen, button + label — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Designer - first screen, button + label." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Designer - first screen, button + label" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Designer - first screen, button + label" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The designer - first screen, button + label works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Designer - first screen, button + label" — one room / button / pattern — and bring it to the next session.
Session 3LEDs, show an iconSunday 22 Nov 2026
Date: Sunday 22 Nov 2026, 09:00–10:30 (90 min) | Unit: B1 Buttons, LEDs & Display | Topic: LEDs, show an icon
Learning objective: By the end of this session, Yim can leds, show an icon — working, tested, and shown to Rica.
Materials: Computer with MakeCode for micro:bit (makecode.microbit.org), micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "LEDs, show an icon." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "LEDs, show an icon" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "LEDs, show an icon" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The leds, show an icon works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "LEDs, show an icon" — one room / button / pattern — and bring it to the next session.
Session 4Build house 2, add pathSunday 22 Nov 2026
Date: Sunday 22 Nov 2026, 11:00–12:30 (90 min) | Unit: M1 Village & Farm | Topic: Build house 2, add path
Learning objective: By the end of this session, Yim can build house 2, add path — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build house 2, add path." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build house 2, add path" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build house 2, add path". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build house 2, add path works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build house 2, add path" — one room / button / pattern — and bring it to the next session.
Session 5Make button change textSunday 22 Nov 2026
Date: Sunday 22 Nov 2026, 13:30–15:00 (90 min) | Unit: A1 First Apps | Topic: Make button change text
Learning objective: By the end of this session, Yim can make button change text — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Make button change text." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Make button change text" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Make button change text" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The make button change text works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Make button change text" — one room / button / pattern — and bring it to the next session.
Week 2 — 24 Nov 2026 to 29 Nov 2026
Session 6Build house 3, farm plotTuesday 24 Nov 2026
Date: Tuesday 24 Nov 2026, 15:30–17:00 (90 min) | Unit: M1 Village & Farm | Topic: Build house 3, farm plot
Learning objective: By the end of this session, Yim can build house 3, farm plot — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build house 3, farm plot." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build house 3, farm plot" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build house 3, farm plot". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build house 3, farm plot works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build house 3, farm plot" — one room / button / pattern — and bring it to the next session.
Session 7Add image + soundSaturday 28 Nov 2026
Date: Saturday 28 Nov 2026, 15:30–17:00 (90 min) | Unit: A1 First Apps | Topic: Add image + sound
Learning objective: By the end of this session, Yim can add image + sound — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add image + sound." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add image + sound" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add image + sound" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add image + sound works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add image + sound" — one room / button / pattern — and bring it to the next session.
Session 8Buttons A / BSunday 29 Nov 2026
Date: Sunday 29 Nov 2026, 09:00–10:30 (90 min) | Unit: B1 Buttons, LEDs & Display | Topic: Buttons A / B
Learning objective: By the end of this session, Yim can buttons a / b — working, tested, and shown to Rica.
Materials: Computer with MakeCode for micro:bit (makecode.microbit.org), micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Buttons A / B." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Buttons A / B" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Buttons A / B" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The buttons a / b works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Buttons A / B" — one room / button / pattern — and bring it to the next session.
Session 9Finish houses, add farm fence + waterSunday 29 Nov 2026
Date: Sunday 29 Nov 2026, 11:00–12:30 (90 min) | Unit: M1 Village & Farm | Topic: Finish houses, add farm fence + water
Learning objective: By the end of this session, Yim can finish houses, add farm fence + water — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Finish houses, add farm fence + water." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Finish houses, add farm fence + water" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Finish houses, add farm fence + water". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The finish houses, add farm fence + water works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Finish houses, add farm fence + water" — one room / button / pattern — and bring it to the next session.
Session 10Test app with companionSunday 29 Nov 2026
Date: Sunday 29 Nov 2026, 13:30–15:00 (90 min) | Unit: A1 First Apps | Topic: Test app with companion
Learning objective: By the end of this session, Yim can test app with companion — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test app with companion." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Test app with companion" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test app with companion" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test app with companion works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test app with companion" — one room / button / pattern — and bring it to the next session.
Week 3 — 01 Dec 2026 to 06 Dec 2026
Session 11Farm crops + animalsTuesday 01 Dec 2026
Date: Tuesday 01 Dec 2026, 15:30–17:00 (90 min) | Unit: M1 Village & Farm | Topic: Farm crops + animals
Learning objective: By the end of this session, Yim can farm crops + animals — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Farm crops + animals." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Farm crops + animals" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Farm crops + animals". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The farm crops + animals works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Farm crops + animals" — one room / button / pattern — and bring it to the next session.
Session 12App 2 - Tap counterSaturday 05 Dec 2026
Date: Saturday 05 Dec 2026, 15:30–17:00 (90 min) | Unit: A1 First Apps | Topic: App 2 - Tap counter
Learning objective: By the end of this session, Yim can app 2 - tap counter — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "App 2 - Tap counter." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "App 2 - Tap counter" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "App 2 - Tap counter" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The app 2 - tap counter works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "App 2 - Tap counter" — one room / button / pattern — and bring it to the next session.
Session 13Scrolling textSunday 06 Dec 2026
Date: Sunday 06 Dec 2026, 09:00–10:30 (90 min) | Unit: B1 Buttons, LEDs & Display | Topic: Scrolling text
Learning objective: By the end of this session, Yim can scrolling text — working, tested, and shown to Rica.
Materials: Computer with MakeCode for micro:bit (makecode.microbit.org), micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Scrolling text." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Scrolling text" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Scrolling text" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The scrolling text works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Scrolling text" — one room / button / pattern — and bring it to the next session.
Session 14Add market stallsSunday 06 Dec 2026
Date: Sunday 06 Dec 2026, 11:00–12:30 (90 min) | Unit: M1 Village & Farm | Topic: Add market stalls
Learning objective: By the end of this session, Yim can add market stalls — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add market stalls." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Add market stalls" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add market stalls". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add market stalls works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add market stalls" — one room / button / pattern — and bring it to the next session.
Session 15Add score + resetSunday 06 Dec 2026
Date: Sunday 06 Dec 2026, 13:30–15:00 (90 min) | Unit: A1 First Apps | Topic: Add score + reset
Learning objective: By the end of this session, Yim can add score + reset — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add score + reset." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add score + reset" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add score + reset" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add score + reset works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add score + reset" — one room / button / pattern — and bring it to the next session.
Week 4 — 08 Dec 2026 to 13 Dec 2026
Session 16Build village hallTuesday 08 Dec 2026
Date: Tuesday 08 Dec 2026, 15:30–17:00 (90 min) | Unit: M1 Village & Farm | Topic: Build village hall
Learning objective: By the end of this session, Yim can build village hall — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build village hall." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build village hall" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build village hall". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build village hall works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build village hall" — one room / button / pattern — and bring it to the next session.
Session 17App 3 - Colour changerSaturday 12 Dec 2026
Date: Saturday 12 Dec 2026, 15:30–17:00 (90 min) | Unit: A1 First Apps | Topic: App 3 - Colour changer
Learning objective: By the end of this session, Yim can app 3 - colour changer — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "App 3 - Colour changer." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "App 3 - Colour changer" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "App 3 - Colour changer" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The app 3 - colour changer works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "App 3 - Colour changer" — one room / button / pattern — and bring it to the next session.
Session 18LED patternsSunday 13 Dec 2026
Date: Sunday 13 Dec 2026, 09:00–10:30 (90 min) | Unit: B1 Buttons, LEDs & Display | Topic: LED patterns
Learning objective: By the end of this session, Yim can led patterns — working, tested, and shown to Rica.
Materials: Computer with MakeCode for micro:bit (makecode.microbit.org), micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "LED patterns." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "LED patterns" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "LED patterns" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The led patterns works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "LED patterns" — one room / button / pattern — and bring it to the next session.
Session 19Add lights, signs, detailsSunday 13 Dec 2026
Date: Sunday 13 Dec 2026, 11:00–12:30 (90 min) | Unit: M1 Village & Farm | Topic: Add lights, signs, details
Learning objective: By the end of this session, Yim can add lights, signs, details — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add lights, signs, details." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Add lights, signs, details" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add lights, signs, details". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add lights, signs, details works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add lights, signs, details" — one room / button / pattern — and bring it to the next session.
Session 20Add 3 coloursSunday 13 Dec 2026
Date: Sunday 13 Dec 2026, 13:30–15:00 (90 min) | Unit: A1 First Apps | Topic: Add 3 colours
Learning objective: By the end of this session, Yim can add 3 colours — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add 3 colours." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add 3 colours" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add 3 colours" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add 3 colours works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add 3 colours" — one room / button / pattern — and bring it to the next session.
Week 5 — 15 Dec 2026 to 20 Dec 2026
Session 21Add interactive feature - working doorTuesday 15 Dec 2026
Date: Tuesday 15 Dec 2026, 15:30–17:00 (90 min) | Unit: M1 Village & Farm | Topic: Add interactive feature - working door
Learning objective: By the end of this session, Yim can add interactive feature - working door — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add interactive feature - working door." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Add interactive feature - working door" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add interactive feature - working door". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add interactive feature - working door works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add interactive feature - working door" — one room / button / pattern — and bring it to the next session.
Session 22Finish App 3, testSaturday 19 Dec 2026
Date: Saturday 19 Dec 2026, 15:30–17:00 (90 min) | Unit: A1 First Apps | Topic: Finish App 3, test
Learning objective: By the end of this session, Yim can finish app 3, test — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Finish App 3, test." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Finish App 3, test" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Finish App 3, test" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The finish app 3, test works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Finish App 3, test" — one room / button / pattern — and bring it to the next session.
Session 23DiceSunday 20 Dec 2026
Date: Sunday 20 Dec 2026, 09:00–10:30 (90 min) | Unit: B1 Buttons, LEDs & Display | Topic: Dice
Learning objective: By the end of this session, Yim can dice — working, tested, and shown to Rica.
Materials: Computer with MakeCode for micro:bit (makecode.microbit.org), micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Dice." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Dice" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Dice" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The dice works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Dice" — one room / button / pattern — and bring it to the next session.
Session 24Add second interactive featureSunday 20 Dec 2026
Date: Sunday 20 Dec 2026, 11:00–12:30 (90 min) | Unit: M1 Village & Farm | Topic: Add second interactive feature
Learning objective: By the end of this session, Yim can add second interactive feature — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add second interactive feature." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Add second interactive feature" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add second interactive feature". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add second interactive feature works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add second interactive feature" — one room / button / pattern — and bring it to the next session.
Session 25Fix bugsSunday 20 Dec 2026
Date: Sunday 20 Dec 2026, 13:30–15:00 (90 min) | Unit: A1 First Apps | Topic: Fix bugs
Learning objective: By the end of this session, Yim can fix bugs — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Fix bugs." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Fix bugs" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Fix bugs" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The fix bugs works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Fix bugs" — one room / button / pattern — and bring it to the next session.
Week 6 — 22 Dec 2026 to 27 Dec 2026
Session 26Finish village detailsTuesday 22 Dec 2026
Date: Tuesday 22 Dec 2026, 15:30–17:00 (90 min) | Unit: M1 Village & Farm | Topic: Finish village details
Learning objective: By the end of this session, Yim can finish village details — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Finish village details." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Finish village details" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Finish village details". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The finish village details works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Finish village details" — one room / button / pattern — and bring it to the next session.
Session 27Improve favourite appSaturday 26 Dec 2026
Date: Saturday 26 Dec 2026, 15:30–17:00 (90 min) | Unit: A1 First Apps | Topic: Improve favourite app
Learning objective: By the end of this session, Yim can improve favourite app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Improve favourite app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Improve favourite app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Improve favourite app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The improve favourite app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Improve favourite app" — one room / button / pattern — and bring it to the next session.
Session 28Smiley reactionsSunday 27 Dec 2026
Date: Sunday 27 Dec 2026, 09:00–10:30 (90 min) | Unit: B1 Buttons, LEDs & Display | Topic: Smiley reactions
Learning objective: By the end of this session, Yim can smiley reactions — working, tested, and shown to Rica.
Materials: Computer with MakeCode for micro:bit (makecode.microbit.org), micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Smiley reactions." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Smiley reactions" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Smiley reactions" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The smiley reactions works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Smiley reactions" — one room / button / pattern — and bring it to the next session.
Session 29Test walkthrough, fix 1 thingSunday 27 Dec 2026
Date: Sunday 27 Dec 2026, 11:00–12:30 (90 min) | Unit: M1 Village & Farm | Topic: Test walkthrough, fix 1 thing
Learning objective: By the end of this session, Yim can test walkthrough, fix 1 thing — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test walkthrough, fix 1 thing." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Test walkthrough, fix 1 thing" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test walkthrough, fix 1 thing". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test walkthrough, fix 1 thing works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test walkthrough, fix 1 thing" — one room / button / pattern — and bring it to the next session.
Session 30Add second screenSunday 27 Dec 2026
Date: Sunday 27 Dec 2026, 13:30–15:00 (90 min) | Unit: A1 First Apps | Topic: Add second screen
Learning objective: By the end of this session, Yim can add second screen — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add second screen." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add second screen" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add second screen" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add second screen works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add second screen" — one room / button / pattern — and bring it to the next session.
Week 7 — 29 Dec 2026 to 03 Jan 2027
Session 31Showcase villageTuesday 29 Dec 2026
Date: Tuesday 29 Dec 2026, 15:30–17:00 (90 min) | Unit: M1 Village & Farm | Topic: Showcase village
Learning objective: By the end of this session, Yim can showcase village — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Showcase village." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Showcase village" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Showcase village". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The showcase village works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Session 32Showcase 3 first appsSaturday 02 Jan 2027
Date: Saturday 02 Jan 2027, 15:30–17:00 (90 min) | Unit: A1 First Apps | Topic: Showcase 3 first apps
Learning objective: By the end of this session, Yim can showcase 3 first apps — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Showcase 3 first apps." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Showcase 3 first apps" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Showcase 3 first apps" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The showcase 3 first apps works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Session 33Light patternsSunday 03 Jan 2027
Date: Sunday 03 Jan 2027, 09:00–10:30 (90 min) | Unit: B1 Buttons, LEDs & Display | Topic: Light patterns
Learning objective: By the end of this session, Yim can light patterns — working, tested, and shown to Rica.
Materials: Computer with MakeCode for micro:bit (makecode.microbit.org), micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Light patterns." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Light patterns" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Light patterns" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The light patterns works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Light patterns" — one room / button / pattern — and bring it to the next session.
Session 34Review village, prep RedstoneSunday 03 Jan 2027
Date: Sunday 03 Jan 2027, 11:00–12:30 (90 min) | Unit: M1 Village & Farm | Topic: Review village, prep Redstone
Learning objective: By the end of this session, Yim can review village, prep redstone — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, mouse, paper + pencil for village plan, timer, screenshot tool. World: new flat / village world, saved as Village-Farm.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Review village, prep Redstone." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Review village, prep Redstone" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Review village, prep Redstone". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The review village, prep redstone works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Session 35Review First AppsSunday 03 Jan 2027
Date: Sunday 03 Jan 2027, 13:30–15:00 (90 min) | Unit: A1 First Apps | Topic: Review First Apps
Learning objective: By the end of this session, Yim can review first apps — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor (ai2.appinventor.mit.edu), phone/tablet with MIT AI2 Companion app, internet, paper + pencil for screen sketch, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Review First Apps." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Review First Apps" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Review First Apps" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The review first apps works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Week 8 — 05 Jan 2027 to 10 Jan 2027
Session 36Redstone basics - power + torchTuesday 05 Jan 2027
Date: Tuesday 05 Jan 2027, 15:30–17:00 (90 min) | Unit: M2 Redstone Machines | Topic: Redstone basics - power + torch
Learning objective: By the end of this session, Yim can redstone basics - power + torch — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Redstone basics - power + torch." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Redstone basics - power + torch" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Redstone basics - power + torch". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The redstone basics - power + torch works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Redstone basics - power + torch" — one room / button / pattern — and bring it to the next session.
Session 37Tap game - planSaturday 09 Jan 2027
Date: Saturday 09 Jan 2027, 15:30–17:00 (90 min) | Unit: A2 Games & Interaction | Topic: Tap game - plan
Learning objective: By the end of this session, Yim can tap game - plan — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Tap game - plan." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Tap game - plan" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Tap game - plan" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The tap game - plan works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Tap game - plan" — one room / button / pattern — and bring it to the next session.
Session 38Button gameSunday 10 Jan 2027
Date: Sunday 10 Jan 2027, 09:00–10:30 (90 min) | Unit: B1 Buttons, LEDs & Display | Topic: Button game
Learning objective: By the end of this session, Yim can button game — working, tested, and shown to Rica.
Materials: Computer with MakeCode for micro:bit (makecode.microbit.org), micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Button game." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Button game" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Button game" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The button game works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Button game" — one room / button / pattern — and bring it to the next session.
Session 39Build simple redstone doorSunday 10 Jan 2027
Date: Sunday 10 Jan 2027, 11:00–12:30 (90 min) | Unit: M2 Redstone Machines | Topic: Build simple redstone door
Learning objective: By the end of this session, Yim can build simple redstone door — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build simple redstone door." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build simple redstone door" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build simple redstone door". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build simple redstone door works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build simple redstone door" — one room / button / pattern — and bring it to the next session.
Session 40Build tap game - scoreSunday 10 Jan 2027
Date: Sunday 10 Jan 2027, 13:30–15:00 (90 min) | Unit: A2 Games & Interaction | Topic: Build tap game - score
Learning objective: By the end of this session, Yim can build tap game - score — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build tap game - score." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build tap game - score" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build tap game - score" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build tap game - score works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build tap game - score" — one room / button / pattern — and bring it to the next session.
Week 9 — 12 Jan 2027 to 17 Jan 2027
Session 41Pressure plates + leversTuesday 12 Jan 2027
Date: Tuesday 12 Jan 2027, 15:30–17:00 (90 min) | Unit: M2 Redstone Machines | Topic: Pressure plates + levers
Learning objective: By the end of this session, Yim can pressure plates + levers — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Pressure plates + levers." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Pressure plates + levers" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Pressure plates + levers". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The pressure plates + levers works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Pressure plates + levers" — one room / button / pattern — and bring it to the next session.
Session 42Add timerSaturday 16 Jan 2027
Date: Saturday 16 Jan 2027, 15:30–17:00 (90 min) | Unit: A2 Games & Interaction | Topic: Add timer
Learning objective: By the end of this session, Yim can add timer — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add timer." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add timer" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add timer" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add timer works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add timer" — one room / button / pattern — and bring it to the next session.
Session 43Show name + iconSunday 17 Jan 2027
Date: Sunday 17 Jan 2027, 09:00–10:30 (90 min) | Unit: B1 Buttons, LEDs & Display | Topic: Show name + icon
Learning objective: By the end of this session, Yim can show name + icon — working, tested, and shown to Rica.
Materials: Computer with MakeCode for micro:bit (makecode.microbit.org), micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Show name + icon." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Show name + icon" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Show name + icon" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The show name + icon works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Show name + icon" — one room / button / pattern — and bring it to the next session.
Session 44Build hidden doorSunday 17 Jan 2027
Date: Sunday 17 Jan 2027, 11:00–12:30 (90 min) | Unit: M2 Redstone Machines | Topic: Build hidden door
Learning objective: By the end of this session, Yim can build hidden door — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build hidden door." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build hidden door" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build hidden door". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build hidden door works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build hidden door" — one room / button / pattern — and bring it to the next session.
Session 45Add game over screenSunday 17 Jan 2027
Date: Sunday 17 Jan 2027, 13:30–15:00 (90 min) | Unit: A2 Games & Interaction | Topic: Add game over screen
Learning objective: By the end of this session, Yim can add game over screen — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add game over screen." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add game over screen" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add game over screen" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add game over screen works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add game over screen" — one room / button / pattern — and bring it to the next session.
Week 10 — 19 Jan 2027 to 24 Jan 2027
Session 46Piston basicsTuesday 19 Jan 2027
Date: Tuesday 19 Jan 2027, 15:30–17:00 (90 min) | Unit: M2 Redstone Machines | Topic: Piston basics
Learning objective: By the end of this session, Yim can piston basics — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Piston basics." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Piston basics" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Piston basics". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The piston basics works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Piston basics" — one room / button / pattern — and bring it to the next session.
Session 47Game 2 - Catch gameSaturday 23 Jan 2027
Date: Saturday 23 Jan 2027, 15:30–17:00 (90 min) | Unit: A2 Games & Interaction | Topic: Game 2 - Catch game
Learning objective: By the end of this session, Yim can game 2 - catch game — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Game 2 - Catch game." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Game 2 - Catch game" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Game 2 - Catch game" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The game 2 - catch game works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Game 2 - Catch game" — one room / button / pattern — and bring it to the next session.
Session 48Mini showcase + reviewSunday 24 Jan 2027
Date: Sunday 24 Jan 2027, 09:00–10:30 (90 min) | Unit: B1 Buttons, LEDs & Display | Topic: Mini showcase + review
Learning objective: By the end of this session, Yim can mini showcase + review — working, tested, and shown to Rica.
Materials: Computer with MakeCode for micro:bit (makecode.microbit.org), micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Mini showcase + review." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Mini showcase + review" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Mini showcase + review" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The mini showcase + review works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Mini showcase + review" — one room / button / pattern — and bring it to the next session.
Session 49Build piston doorSunday 24 Jan 2027
Date: Sunday 24 Jan 2027, 11:00–12:30 (90 min) | Unit: M2 Redstone Machines | Topic: Build piston door
Learning objective: By the end of this session, Yim can build piston door — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build piston door." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build piston door" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build piston door". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build piston door works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build piston door" — one room / button / pattern — and bring it to the next session.
Session 50Add levelsSunday 24 Jan 2027
Date: Sunday 24 Jan 2027, 13:30–15:00 (90 min) | Unit: A2 Games & Interaction | Topic: Add levels
Learning objective: By the end of this session, Yim can add levels — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add levels." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add levels" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add levels" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add levels works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add levels" — one room / button / pattern — and bring it to the next session.
Week 11 — 26 Jan 2027 to 31 Jan 2027
Session 51Redstone lamp circuitTuesday 26 Jan 2027
Date: Tuesday 26 Jan 2027, 15:30–17:00 (90 min) | Unit: M2 Redstone Machines | Topic: Redstone lamp circuit
Learning objective: By the end of this session, Yim can redstone lamp circuit — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Redstone lamp circuit." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Redstone lamp circuit" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Redstone lamp circuit". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The redstone lamp circuit works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Redstone lamp circuit" — one room / button / pattern — and bring it to the next session.
Session 52Add sounds + imagesSaturday 30 Jan 2027
Date: Saturday 30 Jan 2027, 15:30–17:00 (90 min) | Unit: A2 Games & Interaction | Topic: Add sounds + images
Learning objective: By the end of this session, Yim can add sounds + images — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add sounds + images." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add sounds + images" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add sounds + images" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add sounds + images works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add sounds + images" — one room / button / pattern — and bring it to the next session.
Session 53TemperatureSunday 31 Jan 2027
Date: Sunday 31 Jan 2027, 09:00–10:30 (90 min) | Unit: B2 Sensors & Input | Topic: Temperature
Learning objective: By the end of this session, Yim can temperature — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer, everyday objects to test sensors (light, temperature).
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Temperature." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Temperature" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Temperature" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The temperature works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Temperature" — one room / button / pattern — and bring it to the next session.
Session 54Light system for villageSunday 31 Jan 2027
Date: Sunday 31 Jan 2027, 11:00–12:30 (90 min) | Unit: M2 Redstone Machines | Topic: Light system for village
Learning objective: By the end of this session, Yim can light system for village — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Light system for village." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Light system for village" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Light system for village". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The light system for village works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Light system for village" — one room / button / pattern — and bring it to the next session.
Session 55Test game 2Sunday 31 Jan 2027
Date: Sunday 31 Jan 2027, 13:30–15:00 (90 min) | Unit: A2 Games & Interaction | Topic: Test game 2
Learning objective: By the end of this session, Yim can test game 2 — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test game 2." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Test game 2" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test game 2" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test game 2 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test game 2" — one room / button / pattern — and bring it to the next session.
Week 12 — 02 Feb 2027 to 07 Feb 2027
Session 56Build a trapTuesday 02 Feb 2027
Date: Tuesday 02 Feb 2027, 15:30–17:00 (90 min) | Unit: M2 Redstone Machines | Topic: Build a trap
Learning objective: By the end of this session, Yim can build a trap — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build a trap." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build a trap" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build a trap". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build a trap works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build a trap" — one room / button / pattern — and bring it to the next session.
Session 57Game 3 - MemorySaturday 06 Feb 2027
Date: Saturday 06 Feb 2027, 15:30–17:00 (90 min) | Unit: A2 Games & Interaction | Topic: Game 3 - Memory
Learning objective: By the end of this session, Yim can game 3 - memory — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Game 3 - Memory." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Game 3 - Memory" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Game 3 - Memory" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The game 3 - memory works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Game 3 - Memory" — one room / button / pattern — and bring it to the next session.
Session 58Light sensorSunday 07 Feb 2027
Date: Sunday 07 Feb 2027, 09:00–10:30 (90 min) | Unit: B2 Sensors & Input | Topic: Light sensor
Learning objective: By the end of this session, Yim can light sensor — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer, everyday objects to test sensors (light, temperature).
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Light sensor." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Light sensor" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Light sensor" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The light sensor works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Light sensor" — one room / button / pattern — and bring it to the next session.
Session 59Build secret passageSunday 07 Feb 2027
Date: Sunday 07 Feb 2027, 11:00–12:30 (90 min) | Unit: M2 Redstone Machines | Topic: Build secret passage
Learning objective: By the end of this session, Yim can build secret passage — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build secret passage." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build secret passage" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build secret passage". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build secret passage works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build secret passage" — one room / button / pattern — and bring it to the next session.
Session 60Build memory cardsSunday 07 Feb 2027
Date: Sunday 07 Feb 2027, 13:30–15:00 (90 min) | Unit: A2 Games & Interaction | Topic: Build memory cards
Learning objective: By the end of this session, Yim can build memory cards — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build memory cards." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build memory cards" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build memory cards" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build memory cards works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build memory cards" — one room / button / pattern — and bring it to the next session.
Week 13 — 09 Feb 2027 to 14 Feb 2027
Session 61Minecart track - startTuesday 09 Feb 2027
Date: Tuesday 09 Feb 2027, 15:30–17:00 (90 min) | Unit: M2 Redstone Machines | Topic: Minecart track - start
Learning objective: By the end of this session, Yim can minecart track - start — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Minecart track - start." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Minecart track - start" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Minecart track - start". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The minecart track - start works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Minecart track - start" — one room / button / pattern — and bring it to the next session.
Session 62Add score to memory gameSaturday 13 Feb 2027
Date: Saturday 13 Feb 2027, 15:30–17:00 (90 min) | Unit: A2 Games & Interaction | Topic: Add score to memory game
Learning objective: By the end of this session, Yim can add score to memory game — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add score to memory game." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add score to memory game" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add score to memory game" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add score to memory game works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add score to memory game" — one room / button / pattern — and bring it to the next session.
Session 63Accelerometer, shakeSunday 14 Feb 2027
Date: Sunday 14 Feb 2027, 09:00–10:30 (90 min) | Unit: B2 Sensors & Input | Topic: Accelerometer, shake
Learning objective: By the end of this session, Yim can accelerometer, shake — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer, everyday objects to test sensors (light, temperature).
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Accelerometer, shake." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Accelerometer, shake" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Accelerometer, shake" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The accelerometer, shake works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Accelerometer, shake" — one room / button / pattern — and bring it to the next session.
Session 64Build minecart stationSunday 14 Feb 2027
Date: Sunday 14 Feb 2027, 11:00–12:30 (90 min) | Unit: M2 Redstone Machines | Topic: Build minecart station
Learning objective: By the end of this session, Yim can build minecart station — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build minecart station." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build minecart station" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build minecart station". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build minecart station works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build minecart station" — one room / button / pattern — and bring it to the next session.
Session 65Test memory gameSunday 14 Feb 2027
Date: Sunday 14 Feb 2027, 13:30–15:00 (90 min) | Unit: A2 Games & Interaction | Topic: Test memory game
Learning objective: By the end of this session, Yim can test memory game — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test memory game." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Test memory game" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test memory game" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test memory game works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test memory game" — one room / button / pattern — and bring it to the next session.
Week 14 — 16 Feb 2027 to 21 Feb 2027
Session 66Automatic farm with pistonsTuesday 16 Feb 2027
Date: Tuesday 16 Feb 2027, 15:30–17:00 (90 min) | Unit: M2 Redstone Machines | Topic: Automatic farm with pistons
Learning objective: By the end of this session, Yim can automatic farm with pistons — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Automatic farm with pistons." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Automatic farm with pistons" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Automatic farm with pistons". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The automatic farm with pistons works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Automatic farm with pistons" — one room / button / pattern — and bring it to the next session.
Session 67Improve best gameSaturday 20 Feb 2027
Date: Saturday 20 Feb 2027, 15:30–17:00 (90 min) | Unit: A2 Games & Interaction | Topic: Improve best game
Learning objective: By the end of this session, Yim can improve best game — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Improve best game." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Improve best game" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Improve best game" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The improve best game works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Improve best game" — one room / button / pattern — and bring it to the next session.
Session 68TiltSunday 21 Feb 2027
Date: Sunday 21 Feb 2027, 09:00–10:30 (90 min) | Unit: B2 Sensors & Input | Topic: Tilt
Learning objective: By the end of this session, Yim can tilt — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer, everyday objects to test sensors (light, temperature).
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Tilt." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Tilt" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Tilt" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The tilt works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Tilt" — one room / button / pattern — and bring it to the next session.
Session 69Test automation, fixSunday 21 Feb 2027
Date: Sunday 21 Feb 2027, 11:00–12:30 (90 min) | Unit: M2 Redstone Machines | Topic: Test automation, fix
Learning objective: By the end of this session, Yim can test automation, fix — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test automation, fix." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Test automation, fix" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test automation, fix". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test automation, fix works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test automation, fix" — one room / button / pattern — and bring it to the next session.
Session 70Add high scoreSunday 21 Feb 2027
Date: Sunday 21 Feb 2027, 13:30–15:00 (90 min) | Unit: A2 Games & Interaction | Topic: Add high score
Learning objective: By the end of this session, Yim can add high score — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add high score." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add high score" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add high score" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add high score works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add high score" — one room / button / pattern — and bring it to the next session.
Week 15 — 23 Feb 2027 to 28 Feb 2027
Session 71Combine 2 machinesTuesday 23 Feb 2027
Date: Tuesday 23 Feb 2027, 15:30–17:00 (90 min) | Unit: M2 Redstone Machines | Topic: Combine 2 machines
Learning objective: By the end of this session, Yim can combine 2 machines — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Combine 2 machines." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Combine 2 machines" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Combine 2 machines". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The combine 2 machines works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Combine 2 machines" — one room / button / pattern — and bring it to the next session.
Session 72Game polishSaturday 27 Feb 2027
Date: Saturday 27 Feb 2027, 15:30–17:00 (90 min) | Unit: A2 Games & Interaction | Topic: Game polish
Learning objective: By the end of this session, Yim can game polish — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Game polish." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Game polish" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Game polish" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The game polish works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Game polish" — one room / button / pattern — and bring it to the next session.
Session 73CompassSunday 28 Feb 2027
Date: Sunday 28 Feb 2027, 09:00–10:30 (90 min) | Unit: B2 Sensors & Input | Topic: Compass
Learning objective: By the end of this session, Yim can compass — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer, everyday objects to test sensors (light, temperature).
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Compass." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Compass" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Compass" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The compass works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Compass" — one room / button / pattern — and bring it to the next session.
Session 74Fix + improve machinesSunday 28 Feb 2027
Date: Sunday 28 Feb 2027, 11:00–12:30 (90 min) | Unit: M2 Redstone Machines | Topic: Fix + improve machines
Learning objective: By the end of this session, Yim can fix + improve machines — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Fix + improve machines." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Fix + improve machines" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Fix + improve machines". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The fix + improve machines works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Fix + improve machines" — one room / button / pattern — and bring it to the next session.
Session 75Playtest gamesSunday 28 Feb 2027
Date: Sunday 28 Feb 2027, 13:30–15:00 (90 min) | Unit: A2 Games & Interaction | Topic: Playtest games
Learning objective: By the end of this session, Yim can playtest games — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Playtest games." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Playtest games" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Playtest games" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The playtest games works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Playtest games" — one room / button / pattern — and bring it to the next session.
Week 16 — 02 Mar 2027 to 07 Mar 2027
Session 76Redstone showcase - 3 machinesTuesday 02 Mar 2027
Date: Tuesday 02 Mar 2027, 15:30–17:00 (90 min) | Unit: M2 Redstone Machines | Topic: Redstone showcase - 3 machines
Learning objective: By the end of this session, Yim can redstone showcase - 3 machines — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Redstone showcase - 3 machines." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Redstone showcase - 3 machines" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Redstone showcase - 3 machines". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The redstone showcase - 3 machines works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Redstone showcase - 3 machines" — one room / button / pattern — and bring it to the next session.
Session 77Games showcaseSaturday 06 Mar 2027
Date: Saturday 06 Mar 2027, 15:30–17:00 (90 min) | Unit: A2 Games & Interaction | Topic: Games showcase
Learning objective: By the end of this session, Yim can games showcase — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Games showcase." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Games showcase" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Games showcase" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The games showcase works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Games showcase" — one room / button / pattern — and bring it to the next session.
Session 78Sound / loudSunday 07 Mar 2027
Date: Sunday 07 Mar 2027, 09:00–10:30 (90 min) | Unit: B2 Sensors & Input | Topic: Sound / loud
Learning objective: By the end of this session, Yim can sound / loud — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer, everyday objects to test sensors (light, temperature).
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Sound / loud." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Sound / loud" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Sound / loud" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The sound / loud works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Sound / loud" — one room / button / pattern — and bring it to the next session.
Session 79Review Redstone unitSunday 07 Mar 2027
Date: Sunday 07 Mar 2027, 11:00–12:30 (90 min) | Unit: M2 Redstone Machines | Topic: Review Redstone unit
Learning objective: By the end of this session, Yim can review redstone unit — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for circuit sketch, timer, screenshot tool. World: Redstone test world with redstone dust, torches, levers, pressure plates, pistons, lamps.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Review Redstone unit." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Review Redstone unit" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Review Redstone unit". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The review redstone unit works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Session 80Review Games unitSunday 07 Mar 2027
Date: Sunday 07 Mar 2027, 13:30–15:00 (90 min) | Unit: A2 Games & Interaction | Topic: Review Games unit
Learning objective: By the end of this session, Yim can review games unit — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for game plan, timer, sound/image files for game.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Review Games unit." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Review Games unit" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Review Games unit" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The review games unit works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Week 17 — 09 Mar 2027 to 14 Mar 2027
Session 81Design a castle - plan on paperTuesday 09 Mar 2027
Date: Tuesday 09 Mar 2027, 15:30–17:00 (90 min) | Unit: M3 Building & Design | Topic: Design a castle - plan on paper
Learning objective: By the end of this session, Yim can design a castle - plan on paper — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Design a castle - plan on paper." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Design a castle - plan on paper" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Design a castle - plan on paper". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The design a castle - plan on paper works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Design a castle - plan on paper" — one room / button / pattern — and bring it to the next session.
Session 82Lists - make a list appSaturday 13 Mar 2027
Date: Saturday 13 Mar 2027, 15:30–17:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Lists - make a list app
Learning objective: By the end of this session, Yim can lists - make a list app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Lists - make a list app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Lists - make a list app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Lists - make a list app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The lists - make a list app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Lists - make a list app" — one room / button / pattern — and bring it to the next session.
Session 83Sensor + displaySunday 14 Mar 2027
Date: Sunday 14 Mar 2027, 09:00–10:30 (90 min) | Unit: B2 Sensors & Input | Topic: Sensor + display
Learning objective: By the end of this session, Yim can sensor + display — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer, everyday objects to test sensors (light, temperature).
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Sensor + display." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Sensor + display" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Sensor + display" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The sensor + display works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Sensor + display" — one room / button / pattern — and bring it to the next session.
Session 84Build castle wallsSunday 14 Mar 2027
Date: Sunday 14 Mar 2027, 11:00–12:30 (90 min) | Unit: M3 Building & Design | Topic: Build castle walls
Learning objective: By the end of this session, Yim can build castle walls — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build castle walls." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build castle walls" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build castle walls". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build castle walls works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build castle walls" — one room / button / pattern — and bring it to the next session.
Session 85Add items to listSunday 14 Mar 2027
Date: Sunday 14 Mar 2027, 13:30–15:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Add items to list
Learning objective: By the end of this session, Yim can add items to list — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add items to list." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add items to list" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add items to list" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add items to list works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add items to list" — one room / button / pattern — and bring it to the next session.
Week 18 — 16 Mar 2027 to 21 Mar 2027
Session 86Build castle towersTuesday 16 Mar 2027
Date: Tuesday 16 Mar 2027, 15:30–17:00 (90 min) | Unit: M3 Building & Design | Topic: Build castle towers
Learning objective: By the end of this session, Yim can build castle towers — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build castle towers." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build castle towers" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build castle towers". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build castle towers works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build castle towers" — one room / button / pattern — and bring it to the next session.
Session 87Quiz app - planSaturday 20 Mar 2027
Date: Saturday 20 Mar 2027, 15:30–17:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Quiz app - plan
Learning objective: By the end of this session, Yim can quiz app - plan — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Quiz app - plan." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Quiz app - plan" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Quiz app - plan" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The quiz app - plan works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Quiz app - plan" — one room / button / pattern — and bring it to the next session.
Session 88Sensor alarmSunday 21 Mar 2027
Date: Sunday 21 Mar 2027, 09:00–10:30 (90 min) | Unit: B2 Sensors & Input | Topic: Sensor alarm
Learning objective: By the end of this session, Yim can sensor alarm — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer, everyday objects to test sensors (light, temperature).
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Sensor alarm." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Sensor alarm" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Sensor alarm" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The sensor alarm works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Sensor alarm" — one room / button / pattern — and bring it to the next session.
Session 89Build castle interiorSunday 21 Mar 2027
Date: Sunday 21 Mar 2027, 11:00–12:30 (90 min) | Unit: M3 Building & Design | Topic: Build castle interior
Learning objective: By the end of this session, Yim can build castle interior — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build castle interior." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build castle interior" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build castle interior". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build castle interior works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build castle interior" — one room / button / pattern — and bring it to the next session.
Session 90Build quiz - 3 questionsSunday 21 Mar 2027
Date: Sunday 21 Mar 2027, 13:30–15:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Build quiz - 3 questions
Learning objective: By the end of this session, Yim can build quiz - 3 questions — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build quiz - 3 questions." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build quiz - 3 questions" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build quiz - 3 questions" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build quiz - 3 questions works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build quiz - 3 questions" — one room / button / pattern — and bring it to the next session.
Week 19 — 23 Mar 2027 to 28 Mar 2027
Session 91Design a town - planTuesday 23 Mar 2027
Date: Tuesday 23 Mar 2027, 15:30–17:00 (90 min) | Unit: M3 Building & Design | Topic: Design a town - plan
Learning objective: By the end of this session, Yim can design a town - plan — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Design a town - plan." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Design a town - plan" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Design a town - plan". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The design a town - plan works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Design a town - plan" — one room / button / pattern — and bring it to the next session.
Session 92Add 5 more questionsSaturday 27 Mar 2027
Date: Saturday 27 Mar 2027, 15:30–17:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Add 5 more questions
Learning objective: By the end of this session, Yim can add 5 more questions — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add 5 more questions." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add 5 more questions" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add 5 more questions" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add 5 more questions works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add 5 more questions" — one room / button / pattern — and bring it to the next session.
Session 93Combine 2 sensorsSunday 28 Mar 2027
Date: Sunday 28 Mar 2027, 09:00–10:30 (90 min) | Unit: B2 Sensors & Input | Topic: Combine 2 sensors
Learning objective: By the end of this session, Yim can combine 2 sensors — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer, everyday objects to test sensors (light, temperature).
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Combine 2 sensors." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Combine 2 sensors" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Combine 2 sensors" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The combine 2 sensors works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Combine 2 sensors" — one room / button / pattern — and bring it to the next session.
Session 94Build town housesSunday 28 Mar 2027
Date: Sunday 28 Mar 2027, 11:00–12:30 (90 min) | Unit: M3 Building & Design | Topic: Build town houses
Learning objective: By the end of this session, Yim can build town houses — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build town houses." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build town houses" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build town houses". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build town houses works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build town houses" — one room / button / pattern — and bring it to the next session.
Session 95Add score screenSunday 28 Mar 2027
Date: Sunday 28 Mar 2027, 13:30–15:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Add score screen
Learning objective: By the end of this session, Yim can add score screen — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add score screen." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add score screen" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add score screen" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add score screen works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add score screen" — one room / button / pattern — and bring it to the next session.
Week 20 — 30 Mar 2027 to 04 Apr 2027
Session 96Build park + bridgeTuesday 30 Mar 2027
Date: Tuesday 30 Mar 2027, 15:30–17:00 (90 min) | Unit: M3 Building & Design | Topic: Build park + bridge
Learning objective: By the end of this session, Yim can build park + bridge — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build park + bridge." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build park + bridge" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build park + bridge". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build park + bridge works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build park + bridge" — one room / button / pattern — and bring it to the next session.
Session 97Collection app - planSaturday 03 Apr 2027
Date: Saturday 03 Apr 2027, 15:30–17:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Collection app - plan
Learning objective: By the end of this session, Yim can collection app - plan — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Collection app - plan." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Collection app - plan" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Collection app - plan" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The collection app - plan works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Collection app - plan" — one room / button / pattern — and bring it to the next session.
Session 98Review sensorsSunday 04 Apr 2027
Date: Sunday 04 Apr 2027, 09:00–10:30 (90 min) | Unit: B2 Sensors & Input | Topic: Review sensors
Learning objective: By the end of this session, Yim can review sensors — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil, timer, everyday objects to test sensors (light, temperature).
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Review sensors." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Review sensors" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Review sensors" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The review sensors works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Session 99Finish townSunday 04 Apr 2027
Date: Sunday 04 Apr 2027, 11:00–12:30 (90 min) | Unit: M3 Building & Design | Topic: Finish town
Learning objective: By the end of this session, Yim can finish town — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Finish town." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Finish town" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Finish town". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The finish town works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Finish town" — one room / button / pattern — and bring it to the next session.
Session 100Build collection - add / viewSunday 04 Apr 2027
Date: Sunday 04 Apr 2027, 13:30–15:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Build collection - add / view
Learning objective: By the end of this session, Yim can build collection - add / view — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build collection - add / view." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build collection - add / view" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build collection - add / view" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build collection - add / view works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build collection - add / view" — one room / button / pattern — and bring it to the next session.
Week 21 — 06 Apr 2027 to 11 Apr 2027
Session 101Themed build - underwaterTuesday 06 Apr 2027
Date: Tuesday 06 Apr 2027, 15:30–17:00 (90 min) | Unit: M3 Building & Design | Topic: Themed build - underwater
Learning objective: By the end of this session, Yim can themed build - underwater — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Themed build - underwater." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Themed build - underwater" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Themed build - underwater". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The themed build - underwater works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Themed build - underwater" — one room / button / pattern — and bring it to the next session.
Session 102Add images to collectionSaturday 10 Apr 2027
Date: Saturday 10 Apr 2027, 15:30–17:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Add images to collection
Learning objective: By the end of this session, Yim can add images to collection — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add images to collection." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add images to collection" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add images to collection" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add images to collection works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add images to collection" — one room / button / pattern — and bring it to the next session.
Session 103Rock-paper-scissorsSunday 11 Apr 2027
Date: Sunday 11 Apr 2027, 09:00–10:30 (90 min) | Unit: B3 Games on Micro:bit | Topic: Rock-paper-scissors
Learning objective: By the end of this session, Yim can rock-paper-scissors — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil for game rules, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Rock-paper-scissors." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Rock-paper-scissors" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Rock-paper-scissors" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The rock-paper-scissors works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Rock-paper-scissors" — one room / button / pattern — and bring it to the next session.
Session 104Finish underwater buildSunday 11 Apr 2027
Date: Sunday 11 Apr 2027, 11:00–12:30 (90 min) | Unit: M3 Building & Design | Topic: Finish underwater build
Learning objective: By the end of this session, Yim can finish underwater build — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Finish underwater build." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Finish underwater build" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Finish underwater build". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The finish underwater build works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Finish underwater build" — one room / button / pattern — and bring it to the next session.
Session 105Test collection appSunday 11 Apr 2027
Date: Sunday 11 Apr 2027, 13:30–15:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Test collection app
Learning objective: By the end of this session, Yim can test collection app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test collection app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Test collection app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test collection app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test collection app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test collection app" — one room / button / pattern — and bring it to the next session.
Week 22 — 13 Apr 2027 to 18 Apr 2027
Session 106Themed build - skyTuesday 13 Apr 2027
Date: Tuesday 13 Apr 2027, 15:30–17:00 (90 min) | Unit: M3 Building & Design | Topic: Themed build - sky
Learning objective: By the end of this session, Yim can themed build - sky — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Themed build - sky." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Themed build - sky" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Themed build - sky". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The themed build - sky works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Themed build - sky" — one room / button / pattern — and bring it to the next session.
Session 107Multi-screen app - planSaturday 17 Apr 2027
Date: Saturday 17 Apr 2027, 15:30–17:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Multi-screen app - plan
Learning objective: By the end of this session, Yim can multi-screen app - plan — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Multi-screen app - plan." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Multi-screen app - plan" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Multi-screen app - plan" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The multi-screen app - plan works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Multi-screen app - plan" — one room / button / pattern — and bring it to the next session.
Session 108Reaction gameSunday 18 Apr 2027
Date: Sunday 18 Apr 2027, 09:00–10:30 (90 min) | Unit: B3 Games on Micro:bit | Topic: Reaction game
Learning objective: By the end of this session, Yim can reaction game — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil for game rules, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Reaction game." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Reaction game" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Reaction game" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The reaction game works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Reaction game" — one room / button / pattern — and bring it to the next session.
Session 109Finish sky buildSunday 18 Apr 2027
Date: Sunday 18 Apr 2027, 11:00–12:30 (90 min) | Unit: M3 Building & Design | Topic: Finish sky build
Learning objective: By the end of this session, Yim can finish sky build — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Finish sky build." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Finish sky build" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Finish sky build". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The finish sky build works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Finish sky build" — one room / button / pattern — and bring it to the next session.
Session 110Build screen 1 + 2Sunday 18 Apr 2027
Date: Sunday 18 Apr 2027, 13:30–15:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Build screen 1 + 2
Learning objective: By the end of this session, Yim can build screen 1 + 2 — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build screen 1 + 2." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build screen 1 + 2" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build screen 1 + 2" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build screen 1 + 2 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build screen 1 + 2" — one room / button / pattern — and bring it to the next session.
Week 23 — 20 Apr 2027 to 25 Apr 2027
Session 111Advanced shapes + texturesTuesday 20 Apr 2027
Date: Tuesday 20 Apr 2027, 15:30–17:00 (90 min) | Unit: M3 Building & Design | Topic: Advanced shapes + textures
Learning objective: By the end of this session, Yim can advanced shapes + textures — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Advanced shapes + textures." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Advanced shapes + textures" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Advanced shapes + textures". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The advanced shapes + textures works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Advanced shapes + textures" — one room / button / pattern — and bring it to the next session.
Session 112Build screen 3Saturday 24 Apr 2027
Date: Saturday 24 Apr 2027, 15:30–17:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Build screen 3
Learning objective: By the end of this session, Yim can build screen 3 — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build screen 3." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build screen 3" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build screen 3" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build screen 3 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build screen 3" — one room / button / pattern — and bring it to the next session.
Session 113Catch gameSunday 25 Apr 2027
Date: Sunday 25 Apr 2027, 09:00–10:30 (90 min) | Unit: B3 Games on Micro:bit | Topic: Catch game
Learning objective: By the end of this session, Yim can catch game — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil for game rules, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Catch game." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Catch game" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Catch game" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The catch game works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Catch game" — one room / button / pattern — and bring it to the next session.
Session 114Detail work, polishSunday 25 Apr 2027
Date: Sunday 25 Apr 2027, 11:00–12:30 (90 min) | Unit: M3 Building & Design | Topic: Detail work, polish
Learning objective: By the end of this session, Yim can detail work, polish — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Detail work, polish." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Detail work, polish" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Detail work, polish". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The detail work, polish works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Detail work, polish" — one room / button / pattern — and bring it to the next session.
Session 115Link screensSunday 25 Apr 2027
Date: Sunday 25 Apr 2027, 13:30–15:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Link screens
Learning objective: By the end of this session, Yim can link screens — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Link screens." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Link screens" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Link screens" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The link screens works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Link screens" — one room / button / pattern — and bring it to the next session.
Week 24 — 27 Apr 2027 to 02 May 2027
Session 116Timed build challenge - finish in 90 minTuesday 27 Apr 2027
Date: Tuesday 27 Apr 2027, 15:30–17:00 (90 min) | Unit: M3 Building & Design | Topic: Timed build challenge - finish in 90 min
Learning objective: By the end of this session, Yim can timed build challenge - finish in 90 min — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Timed build challenge - finish in 90 min." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Timed build challenge - finish in 90 min" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Timed build challenge - finish in 90 min". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The timed build challenge - finish in 90 min works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Timed build challenge - finish in 90 min" — one room / button / pattern — and bring it to the next session.
Session 117Test multi-screen appSaturday 01 May 2027
Date: Saturday 01 May 2027, 15:30–17:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Test multi-screen app
Learning objective: By the end of this session, Yim can test multi-screen app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test multi-screen app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Test multi-screen app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test multi-screen app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test multi-screen app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test multi-screen app" — one room / button / pattern — and bring it to the next session.
Session 118Score gameSunday 02 May 2027
Date: Sunday 02 May 2027, 09:00–10:30 (90 min) | Unit: B3 Games on Micro:bit | Topic: Score game
Learning objective: By the end of this session, Yim can score game — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil for game rules, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Score game." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Score game" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Score game" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The score game works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Score game" — one room / button / pattern — and bring it to the next session.
Session 119Review best buildSunday 02 May 2027
Date: Sunday 02 May 2027, 11:00–12:30 (90 min) | Unit: M3 Building & Design | Topic: Review best build
Learning objective: By the end of this session, Yim can review best build — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for design sketch, timer, screenshot tool. World: creative building world, blocks for chosen theme.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Review best build." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Review best build" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Review best build". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The review best build works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Session 120Fix navigationSunday 02 May 2027
Date: Sunday 02 May 2027, 13:30–15:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Fix navigation
Learning objective: By the end of this session, Yim can fix navigation — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Fix navigation." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Fix navigation" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Fix navigation" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The fix navigation works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Fix navigation" — one room / button / pattern — and bring it to the next session.
Week 25 — 04 May 2027 to 09 May 2027
Session 121Story plan - hero + questTuesday 04 May 2027
Date: Tuesday 04 May 2027, 15:30–17:00 (90 min) | Unit: M4 Adventure Worlds | Topic: Story plan - hero + quest
Learning objective: By the end of this session, Yim can story plan - hero + quest — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Story plan - hero + quest." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Story plan - hero + quest" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Story plan - hero + quest". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The story plan - hero + quest works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Story plan - hero + quest" — one room / button / pattern — and bring it to the next session.
Session 122Showcase quiz + collection appsSaturday 08 May 2027
Date: Saturday 08 May 2027, 15:30–17:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Showcase quiz + collection apps
Learning objective: By the end of this session, Yim can showcase quiz + collection apps — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Showcase quiz + collection apps." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Showcase quiz + collection apps" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Showcase quiz + collection apps" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The showcase quiz + collection apps works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Session 123Two-player ideaSunday 09 May 2027
Date: Sunday 09 May 2027, 09:00–10:30 (90 min) | Unit: B3 Games on Micro:bit | Topic: Two-player idea
Learning objective: By the end of this session, Yim can two-player idea — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil for game rules, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Two-player idea." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Two-player idea" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Two-player idea" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The two-player idea works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Two-player idea" — one room / button / pattern — and bring it to the next session.
Session 124Build start areaSunday 09 May 2027
Date: Sunday 09 May 2027, 11:00–12:30 (90 min) | Unit: M4 Adventure Worlds | Topic: Build start area
Learning objective: By the end of this session, Yim can build start area — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build start area." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build start area" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build start area". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build start area works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build start area" — one room / button / pattern — and bring it to the next session.
Session 125Review Data unitSunday 09 May 2027
Date: Sunday 09 May 2027, 13:30–15:00 (90 min) | Unit: A3 Data, Lists & Screens | Topic: Review Data unit
Learning objective: By the end of this session, Yim can review data unit — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for screen map, timer, list of quiz / collection items.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Review Data unit." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Review Data unit" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Review Data unit" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The review data unit works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Week 26 — 11 May 2027 to 16 May 2027
Session 126Build quest 1 areaTuesday 11 May 2027
Date: Tuesday 11 May 2027, 15:30–17:00 (90 min) | Unit: M4 Adventure Worlds | Topic: Build quest 1 area
Learning objective: By the end of this session, Yim can build quest 1 area — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build quest 1 area." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build quest 1 area" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build quest 1 area". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build quest 1 area works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build quest 1 area" — one room / button / pattern — and bring it to the next session.
Session 127Camera app - take photoSaturday 15 May 2027
Date: Saturday 15 May 2027, 15:30–17:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Camera app - take photo
Learning objective: By the end of this session, Yim can camera app - take photo — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Camera app - take photo." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Camera app - take photo" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Camera app - take photo" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The camera app - take photo works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Camera app - take photo" — one room / button / pattern — and bring it to the next session.
Session 128Memory gameSunday 16 May 2027
Date: Sunday 16 May 2027, 09:00–10:30 (90 min) | Unit: B3 Games on Micro:bit | Topic: Memory game
Learning objective: By the end of this session, Yim can memory game — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil for game rules, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Memory game." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Memory game" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Memory game" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The memory game works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Memory game" — one room / button / pattern — and bring it to the next session.
Session 129Add characters + signsSunday 16 May 2027
Date: Sunday 16 May 2027, 11:00–12:30 (90 min) | Unit: M4 Adventure Worlds | Topic: Add characters + signs
Learning objective: By the end of this session, Yim can add characters + signs — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add characters + signs." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Add characters + signs" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add characters + signs". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add characters + signs works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add characters + signs" — one room / button / pattern — and bring it to the next session.
Session 130Show photo in appSunday 16 May 2027
Date: Sunday 16 May 2027, 13:30–15:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Show photo in app
Learning objective: By the end of this session, Yim can show photo in app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Show photo in app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Show photo in app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Show photo in app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The show photo in app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Show photo in app" — one room / button / pattern — and bring it to the next session.
Week 27 — 18 May 2027 to 23 May 2027
Session 131Build quest 2 - puzzleTuesday 18 May 2027
Date: Tuesday 18 May 2027, 15:30–17:00 (90 min) | Unit: M4 Adventure Worlds | Topic: Build quest 2 - puzzle
Learning objective: By the end of this session, Yim can build quest 2 - puzzle — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build quest 2 - puzzle." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build quest 2 - puzzle" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build quest 2 - puzzle". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build quest 2 - puzzle works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build quest 2 - puzzle" — one room / button / pattern — and bring it to the next session.
Session 132Sound recorder appSaturday 22 May 2027
Date: Saturday 22 May 2027, 15:30–17:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Sound recorder app
Learning objective: By the end of this session, Yim can sound recorder app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Sound recorder app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Sound recorder app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Sound recorder app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The sound recorder app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Sound recorder app" — one room / button / pattern — and bring it to the next session.
Session 133MazeSunday 23 May 2027
Date: Sunday 23 May 2027, 09:00–10:30 (90 min) | Unit: B3 Games on Micro:bit | Topic: Maze
Learning objective: By the end of this session, Yim can maze — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil for game rules, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Maze." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Maze" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Maze" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The maze works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Maze" — one room / button / pattern — and bring it to the next session.
Session 134Add command blocks (visual)Sunday 23 May 2027
Date: Sunday 23 May 2027, 11:00–12:30 (90 min) | Unit: M4 Adventure Worlds | Topic: Add command blocks (visual)
Learning objective: By the end of this session, Yim can add command blocks (visual) — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add command blocks (visual)." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Add command blocks (visual)" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add command blocks (visual)". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add command blocks (visual) works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add command blocks (visual)" — one room / button / pattern — and bring it to the next session.
Session 135Play back soundSunday 23 May 2027
Date: Sunday 23 May 2027, 13:30–15:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Play back sound
Learning objective: By the end of this session, Yim can play back sound — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Play back sound." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Play back sound" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Play back sound" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The play back sound works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Play back sound" — one room / button / pattern — and bring it to the next session.
Week 28 — 25 May 2027 to 30 May 2027
Session 136Build quest 3 - mazeTuesday 25 May 2027
Date: Tuesday 25 May 2027, 15:30–17:00 (90 min) | Unit: M4 Adventure Worlds | Topic: Build quest 3 - maze
Learning objective: By the end of this session, Yim can build quest 3 - maze — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build quest 3 - maze." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build quest 3 - maze" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build quest 3 - maze". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build quest 3 - maze works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build quest 3 - maze" — one room / button / pattern — and bring it to the next session.
Session 137Accelerometer - shake to changeSaturday 29 May 2027
Date: Saturday 29 May 2027, 15:30–17:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Accelerometer - shake to change
Learning objective: By the end of this session, Yim can accelerometer - shake to change — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Accelerometer - shake to change." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Accelerometer - shake to change" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Accelerometer - shake to change" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The accelerometer - shake to change works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Accelerometer - shake to change" — one room / button / pattern — and bring it to the next session.
Session 138Timer gameSunday 30 May 2027
Date: Sunday 30 May 2027, 09:00–10:30 (90 min) | Unit: B3 Games on Micro:bit | Topic: Timer game
Learning objective: By the end of this session, Yim can timer game — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil for game rules, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Timer game." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Timer game" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Timer game" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The timer game works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Timer game" — one room / button / pattern — and bring it to the next session.
Session 139Test mazeSunday 30 May 2027
Date: Sunday 30 May 2027, 11:00–12:30 (90 min) | Unit: M4 Adventure Worlds | Topic: Test maze
Learning objective: By the end of this session, Yim can test maze — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test maze." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Test maze" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test maze". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test maze works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test maze" — one room / button / pattern — and bring it to the next session.
Session 140Test shake appSunday 30 May 2027
Date: Sunday 30 May 2027, 13:30–15:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Test shake app
Learning objective: By the end of this session, Yim can test shake app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test shake app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Test shake app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test shake app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test shake app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test shake app" — one room / button / pattern — and bring it to the next session.
Week 29 — 01 Jun 2027 to 06 Jun 2027
Session 141Add treasure + endingTuesday 01 Jun 2027
Date: Tuesday 01 Jun 2027, 15:30–17:00 (90 min) | Unit: M4 Adventure Worlds | Topic: Add treasure + ending
Learning objective: By the end of this session, Yim can add treasure + ending — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add treasure + ending." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Add treasure + ending" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add treasure + ending". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add treasure + ending works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add treasure + ending" — one room / button / pattern — and bring it to the next session.
Session 142Text-to-speech appSaturday 05 Jun 2027
Date: Saturday 05 Jun 2027, 15:30–17:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Text-to-speech app
Learning objective: By the end of this session, Yim can text-to-speech app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Text-to-speech app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Text-to-speech app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Text-to-speech app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The text-to-speech app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Text-to-speech app" — one room / button / pattern — and bring it to the next session.
Session 143Improve best gameSunday 06 Jun 2027
Date: Sunday 06 Jun 2027, 09:00–10:30 (90 min) | Unit: B3 Games on Micro:bit | Topic: Improve best game
Learning objective: By the end of this session, Yim can improve best game — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil for game rules, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Improve best game." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Improve best game" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Improve best game" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The improve best game works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Improve best game" — one room / button / pattern — and bring it to the next session.
Session 144Playtest full mapSunday 06 Jun 2027
Date: Sunday 06 Jun 2027, 11:00–12:30 (90 min) | Unit: M4 Adventure Worlds | Topic: Playtest full map
Learning objective: By the end of this session, Yim can playtest full map — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Playtest full map." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Playtest full map" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Playtest full map". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The playtest full map works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Playtest full map" — one room / button / pattern — and bring it to the next session.
Session 145Test speech appSunday 06 Jun 2027
Date: Sunday 06 Jun 2027, 13:30–15:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Test speech app
Learning objective: By the end of this session, Yim can test speech app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test speech app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Test speech app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test speech app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test speech app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test speech app" — one room / button / pattern — and bring it to the next session.
Week 30 — 08 Jun 2027 to 13 Jun 2027
Session 146Fix map from playtestTuesday 08 Jun 2027
Date: Tuesday 08 Jun 2027, 15:30–17:00 (90 min) | Unit: M4 Adventure Worlds | Topic: Fix map from playtest
Learning objective: By the end of this session, Yim can fix map from playtest — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Fix map from playtest." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Fix map from playtest" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Fix map from playtest". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The fix map from playtest works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Fix map from playtest" — one room / button / pattern — and bring it to the next session.
Session 147Media app - gallerySaturday 12 Jun 2027
Date: Saturday 12 Jun 2027, 15:30–17:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Media app - gallery
Learning objective: By the end of this session, Yim can media app - gallery — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Media app - gallery." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Media app - gallery" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Media app - gallery" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The media app - gallery works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Media app - gallery" — one room / button / pattern — and bring it to the next session.
Session 148Playtest gamesSunday 13 Jun 2027
Date: Sunday 13 Jun 2027, 09:00–10:30 (90 min) | Unit: B3 Games on Micro:bit | Topic: Playtest games
Learning objective: By the end of this session, Yim can playtest games — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil for game rules, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Playtest games." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Playtest games" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Playtest games" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The playtest games works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Playtest games" — one room / button / pattern — and bring it to the next session.
Session 149Add sounds + final detailsSunday 13 Jun 2027
Date: Sunday 13 Jun 2027, 11:00–12:30 (90 min) | Unit: M4 Adventure Worlds | Topic: Add sounds + final details
Learning objective: By the end of this session, Yim can add sounds + final details — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add sounds + final details." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Add sounds + final details" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add sounds + final details". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add sounds + final details works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add sounds + final details" — one room / button / pattern — and bring it to the next session.
Session 150Add 5 picturesSunday 13 Jun 2027
Date: Sunday 13 Jun 2027, 13:30–15:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Add 5 pictures
Learning objective: By the end of this session, Yim can add 5 pictures — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add 5 pictures." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add 5 pictures" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add 5 pictures" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add 5 pictures works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add 5 pictures" — one room / button / pattern — and bring it to the next session.
Week 31 — 15 Jun 2027 to 20 Jun 2027
Session 151Adventure map 2 - new theme, planTuesday 15 Jun 2027
Date: Tuesday 15 Jun 2027, 15:30–17:00 (90 min) | Unit: M4 Adventure Worlds | Topic: Adventure map 2 - new theme, plan
Learning objective: By the end of this session, Yim can adventure map 2 - new theme, plan — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Adventure map 2 - new theme, plan." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Adventure map 2 - new theme, plan" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Adventure map 2 - new theme, plan". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The adventure map 2 - new theme, plan works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Adventure map 2 - new theme, plan" — one room / button / pattern — and bring it to the next session.
Session 152Sensor app - tilt gameSaturday 19 Jun 2027
Date: Saturday 19 Jun 2027, 15:30–17:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Sensor app - tilt game
Learning objective: By the end of this session, Yim can sensor app - tilt game — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Sensor app - tilt game." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Sensor app - tilt game" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Sensor app - tilt game" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The sensor app - tilt game works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Sensor app - tilt game" — one room / button / pattern — and bring it to the next session.
Session 153Games showcaseSunday 20 Jun 2027
Date: Sunday 20 Jun 2027, 09:00–10:30 (90 min) | Unit: B3 Games on Micro:bit | Topic: Games showcase
Learning objective: By the end of this session, Yim can games showcase — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack if available (simulator if not), paper + pencil for game rules, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Games showcase." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Games showcase" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Games showcase" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The games showcase works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Games showcase" — one room / button / pattern — and bring it to the next session.
Session 154Build start areaSunday 20 Jun 2027
Date: Sunday 20 Jun 2027, 11:00–12:30 (90 min) | Unit: M4 Adventure Worlds | Topic: Build start area
Learning objective: By the end of this session, Yim can build start area — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build start area." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build start area" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build start area". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build start area works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build start area" — one room / button / pattern — and bring it to the next session.
Session 155Test tilt gameSunday 20 Jun 2027
Date: Sunday 20 Jun 2027, 13:30–15:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Test tilt game
Learning objective: By the end of this session, Yim can test tilt game — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test tilt game." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Test tilt game" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test tilt game" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test tilt game works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test tilt game" — one room / button / pattern — and bring it to the next session.
Week 32 — 22 Jun 2027 to 27 Jun 2027
Session 156Finish adventure map 2Tuesday 22 Jun 2027
Date: Tuesday 22 Jun 2027, 15:30–17:00 (90 min) | Unit: M4 Adventure Worlds | Topic: Finish adventure map 2
Learning objective: By the end of this session, Yim can finish adventure map 2 — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Finish adventure map 2." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Finish adventure map 2" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Finish adventure map 2". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The finish adventure map 2 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Finish adventure map 2" — one room / button / pattern — and bring it to the next session.
Session 157Combine camera + soundSaturday 26 Jun 2027
Date: Saturday 26 Jun 2027, 15:30–17:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Combine camera + sound
Learning objective: By the end of this session, Yim can combine camera + sound — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Combine camera + sound." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Combine camera + sound" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Combine camera + sound" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The combine camera + sound works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Combine camera + sound" — one room / button / pattern — and bring it to the next session.
Session 158Invention plan, choose a problemSunday 27 Jun 2027
Date: Sunday 27 Jun 2027, 09:00–10:30 (90 min) | Unit: B4 Micro:bit Inventions | Topic: Invention plan, choose a problem
Learning objective: By the end of this session, Yim can invention plan, choose a problem — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, craft materials for housing the micro:bit if needed.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Invention plan, choose a problem." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Invention plan, choose a problem" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Invention plan, choose a problem" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The invention plan, choose a problem works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Invention plan, choose a problem" — one room / button / pattern — and bring it to the next session.
Session 159Showcase both mapsSunday 27 Jun 2027
Date: Sunday 27 Jun 2027, 11:00–12:30 (90 min) | Unit: M4 Adventure Worlds | Topic: Showcase both maps
Learning objective: By the end of this session, Yim can showcase both maps — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for story map, timer, screenshot tool. World: adventure map world, signs, command blocks (visual), characters.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Showcase both maps." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Showcase both maps" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Showcase both maps". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The showcase both maps works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Session 160Test combined appSunday 27 Jun 2027
Date: Sunday 27 Jun 2027, 13:30–15:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Test combined app
Learning objective: By the end of this session, Yim can test combined app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test combined app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Test combined app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test combined app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test combined app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test combined app" — one room / button / pattern — and bring it to the next session.
Week 33 — 29 Jun 2027 to 04 Jul 2027
Session 161Coding blocks - loopsTuesday 29 Jun 2027
Date: Tuesday 29 Jun 2027, 15:30–17:00 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Coding blocks - loops
Learning objective: By the end of this session, Yim can coding blocks - loops — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Coding blocks - loops." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Coding blocks - loops" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Coding blocks - loops". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The coding blocks - loops works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Coding blocks - loops" — one room / button / pattern — and bring it to the next session.
Session 162Improve sensor appSaturday 03 Jul 2027
Date: Saturday 03 Jul 2027, 15:30–17:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Improve sensor app
Learning objective: By the end of this session, Yim can improve sensor app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Improve sensor app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Improve sensor app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Improve sensor app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The improve sensor app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Improve sensor app" — one room / button / pattern — and bring it to the next session.
Session 163Alarm gadgetSunday 04 Jul 2027
Date: Sunday 04 Jul 2027, 09:00–10:30 (90 min) | Unit: B4 Micro:bit Inventions | Topic: Alarm gadget
Learning objective: By the end of this session, Yim can alarm gadget — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, craft materials for housing the micro:bit if needed.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Alarm gadget." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Alarm gadget" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Alarm gadget" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The alarm gadget works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Alarm gadget" — one room / button / pattern — and bring it to the next session.
Session 164Loop build - repeating patternSunday 04 Jul 2027
Date: Sunday 04 Jul 2027, 11:00–12:30 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Loop build - repeating pattern
Learning objective: By the end of this session, Yim can loop build - repeating pattern — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Loop build - repeating pattern." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Loop build - repeating pattern" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Loop build - repeating pattern". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The loop build - repeating pattern works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Loop build - repeating pattern" — one room / button / pattern — and bring it to the next session.
Session 165Fix bugsSunday 04 Jul 2027
Date: Sunday 04 Jul 2027, 13:30–15:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Fix bugs
Learning objective: By the end of this session, Yim can fix bugs — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Fix bugs." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Fix bugs" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Fix bugs" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The fix bugs works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Fix bugs" — one room / button / pattern — and bring it to the next session.
Week 34 — 06 Jul 2027 to 11 Jul 2027
Session 166Conditionals - if blocksTuesday 06 Jul 2027
Date: Tuesday 06 Jul 2027, 15:30–17:00 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Conditionals - if blocks
Learning objective: By the end of this session, Yim can conditionals - if blocks — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Conditionals - if blocks." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Conditionals - if blocks" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Conditionals - if blocks". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The conditionals - if blocks works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Conditionals - if blocks" — one room / button / pattern — and bring it to the next session.
Session 167Media + sensor showcaseSaturday 10 Jul 2027
Date: Saturday 10 Jul 2027, 15:30–17:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Media + sensor showcase
Learning objective: By the end of this session, Yim can media + sensor showcase — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Media + sensor showcase." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Media + sensor showcase" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Media + sensor showcase" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The media + sensor showcase works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Media + sensor showcase" — one room / button / pattern — and bring it to the next session.
Session 168Step counterSunday 11 Jul 2027
Date: Sunday 11 Jul 2027, 09:00–10:30 (90 min) | Unit: B4 Micro:bit Inventions | Topic: Step counter
Learning objective: By the end of this session, Yim can step counter — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, craft materials for housing the micro:bit if needed.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Step counter." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Step counter" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Step counter" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The step counter works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Step counter" — one room / button / pattern — and bring it to the next session.
Session 169Build a sorterSunday 11 Jul 2027
Date: Sunday 11 Jul 2027, 11:00–12:30 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Build a sorter
Learning objective: By the end of this session, Yim can build a sorter — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build a sorter." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build a sorter" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build a sorter". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build a sorter works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build a sorter" — one room / button / pattern — and bring it to the next session.
Session 170Review Sensors unitSunday 11 Jul 2027
Date: Sunday 11 Jul 2027, 13:30–15:00 (90 min) | Unit: A4 Sensors & Media Apps | Topic: Review Sensors unit
Learning objective: By the end of this session, Yim can review sensors unit — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app + camera / microphone, internet, paper + pencil, timer.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Review Sensors unit." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Review Sensors unit" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Review Sensors unit" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The review sensors unit works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Week 35 — 13 Jul 2027 to 18 Jul 2027
Session 171Variables - scoreTuesday 13 Jul 2027
Date: Tuesday 13 Jul 2027, 15:30–17:00 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Variables - score
Learning objective: By the end of this session, Yim can variables - score — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Variables - score." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Variables - score" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Variables - score". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The variables - score works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Variables - score" — one room / button / pattern — and bring it to the next session.
Session 172Planner app - planSaturday 17 Jul 2027
Date: Saturday 17 Jul 2027, 15:30–17:00 (90 min) | Unit: A5 Useful Apps | Topic: Planner app - plan
Learning objective: By the end of this session, Yim can planner app - plan — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Planner app - plan." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Planner app - plan" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Planner app - plan" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The planner app - plan works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Finish the paper plan — draw / list the next 3 steps for the next session.
Session 173Plant / light helperSunday 18 Jul 2027
Date: Sunday 18 Jul 2027, 09:00–10:30 (90 min) | Unit: B4 Micro:bit Inventions | Topic: Plant / light helper
Learning objective: By the end of this session, Yim can plant / light helper — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, craft materials for housing the micro:bit if needed.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Plant / light helper." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Plant / light helper" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Plant / light helper" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The plant / light helper works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Finish the paper plan — draw / list the next 3 steps for the next session.
Session 174Build score systemSunday 18 Jul 2027
Date: Sunday 18 Jul 2027, 11:00–12:30 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Build score system
Learning objective: By the end of this session, Yim can build score system — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build score system." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build score system" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build score system". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build score system works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build score system" — one room / button / pattern — and bring it to the next session.
Session 175Build planner - add taskSunday 18 Jul 2027
Date: Sunday 18 Jul 2027, 13:30–15:00 (90 min) | Unit: A5 Useful Apps | Topic: Build planner - add task
Learning objective: By the end of this session, Yim can build planner - add task — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build planner - add task." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build planner - add task" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build planner - add task" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build planner - add task works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build planner - add task" — one room / button / pattern — and bring it to the next session.
Week 36 — 20 Jul 2027 to 25 Jul 2027
Session 176Build automated farmTuesday 20 Jul 2027
Date: Tuesday 20 Jul 2027, 15:30–17:00 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Build automated farm
Learning objective: By the end of this session, Yim can build automated farm — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build automated farm." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build automated farm" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build automated farm". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build automated farm works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build automated farm" — one room / button / pattern — and bring it to the next session.
Session 177Add list + delete taskSaturday 24 Jul 2027
Date: Saturday 24 Jul 2027, 15:30–17:00 (90 min) | Unit: A5 Useful Apps | Topic: Add list + delete task
Learning objective: By the end of this session, Yim can add list + delete task — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add list + delete task." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add list + delete task" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add list + delete task" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add list + delete task works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add list + delete task" — one room / button / pattern — and bring it to the next session.
Session 178Weather displaySunday 25 Jul 2027
Date: Sunday 25 Jul 2027, 09:00–10:30 (90 min) | Unit: B4 Micro:bit Inventions | Topic: Weather display
Learning objective: By the end of this session, Yim can weather display — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, craft materials for housing the micro:bit if needed.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Weather display." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Weather display" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Weather display" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The weather display works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Weather display" — one room / button / pattern — and bring it to the next session.
Session 179Test farmSunday 25 Jul 2027
Date: Sunday 25 Jul 2027, 11:00–12:30 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Test farm
Learning objective: By the end of this session, Yim can test farm — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test farm." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Test farm" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test farm". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test farm works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test farm" — one room / button / pattern — and bring it to the next session.
Session 180Test plannerSunday 25 Jul 2027
Date: Sunday 25 Jul 2027, 13:30–15:00 (90 min) | Unit: A5 Useful Apps | Topic: Test planner
Learning objective: By the end of this session, Yim can test planner — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test planner." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Test planner" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test planner" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test planner works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test planner" — one room / button / pattern — and bring it to the next session.
Week 37 — 27 Jul 2027 to 01 Aug 2027
Session 181Build automated factoryTuesday 27 Jul 2027
Date: Tuesday 27 Jul 2027, 15:30–17:00 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Build automated factory
Learning objective: By the end of this session, Yim can build automated factory — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build automated factory." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build automated factory" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build automated factory". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build automated factory works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build automated factory" — one room / button / pattern — and bring it to the next session.
Session 182Reminder appSaturday 31 Jul 2027
Date: Saturday 31 Jul 2027, 15:30–17:00 (90 min) | Unit: A5 Useful Apps | Topic: Reminder app
Learning objective: By the end of this session, Yim can reminder app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Reminder app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Reminder app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Reminder app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The reminder app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Reminder app" — one room / button / pattern — and bring it to the next session.
Session 183Timer gadgetSunday 01 Aug 2027
Date: Sunday 01 Aug 2027, 09:00–10:30 (90 min) | Unit: B4 Micro:bit Inventions | Topic: Timer gadget
Learning objective: By the end of this session, Yim can timer gadget — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, craft materials for housing the micro:bit if needed.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Timer gadget." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Timer gadget" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Timer gadget" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The timer gadget works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Timer gadget" — one room / button / pattern — and bring it to the next session.
Session 184Test factorySunday 01 Aug 2027
Date: Sunday 01 Aug 2027, 11:00–12:30 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Test factory
Learning objective: By the end of this session, Yim can test factory — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test factory." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Test factory" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test factory". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test factory works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test factory" — one room / button / pattern — and bring it to the next session.
Session 185Add time + alertSunday 01 Aug 2027
Date: Sunday 01 Aug 2027, 13:30–15:00 (90 min) | Unit: A5 Useful Apps | Topic: Add time + alert
Learning objective: By the end of this session, Yim can add time + alert — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add time + alert." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add time + alert" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add time + alert" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add time + alert works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add time + alert" — one room / button / pattern — and bring it to the next session.
Week 38 — 03 Aug 2027 to 08 Aug 2027
Session 186Build moving machineTuesday 03 Aug 2027
Date: Tuesday 03 Aug 2027, 15:30–17:00 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Build moving machine
Learning objective: By the end of this session, Yim can build moving machine — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build moving machine." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build moving machine" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build moving machine". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build moving machine works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build moving machine" — one room / button / pattern — and bring it to the next session.
Session 187Helper app for family - planSaturday 07 Aug 2027
Date: Saturday 07 Aug 2027, 15:30–17:00 (90 min) | Unit: A5 Useful Apps | Topic: Helper app for family - plan
Learning objective: By the end of this session, Yim can helper app for family - plan — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Helper app for family - plan." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Helper app for family - plan" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Helper app for family - plan" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The helper app for family - plan works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Helper app for family - plan" — one room / button / pattern — and bring it to the next session.
Session 188Message gadgetSunday 08 Aug 2027
Date: Sunday 08 Aug 2027, 09:00–10:30 (90 min) | Unit: B4 Micro:bit Inventions | Topic: Message gadget
Learning objective: By the end of this session, Yim can message gadget — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, craft materials for housing the micro:bit if needed.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Message gadget." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Message gadget" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Message gadget" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The message gadget works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Message gadget" — one room / button / pattern — and bring it to the next session.
Session 189Fix machineSunday 08 Aug 2027
Date: Sunday 08 Aug 2027, 11:00–12:30 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Fix machine
Learning objective: By the end of this session, Yim can fix machine — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Fix machine." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Fix machine" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Fix machine". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The fix machine works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Fix machine" — one room / button / pattern — and bring it to the next session.
Session 190Build helper - screen 1Sunday 08 Aug 2027
Date: Sunday 08 Aug 2027, 13:30–15:00 (90 min) | Unit: A5 Useful Apps | Topic: Build helper - screen 1
Learning objective: By the end of this session, Yim can build helper - screen 1 — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build helper - screen 1." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build helper - screen 1" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build helper - screen 1" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build helper - screen 1 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build helper - screen 1" — one room / button / pattern — and bring it to the next session.
Week 39 — 10 Aug 2027 to 15 Aug 2027
Session 191Combine loops + conditionalsTuesday 10 Aug 2027
Date: Tuesday 10 Aug 2027, 15:30–17:00 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Combine loops + conditionals
Learning objective: By the end of this session, Yim can combine loops + conditionals — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Combine loops + conditionals." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Combine loops + conditionals" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Combine loops + conditionals". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The combine loops + conditionals works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Combine loops + conditionals" — one room / button / pattern — and bring it to the next session.
Session 192Build helper - screen 2Saturday 14 Aug 2027
Date: Saturday 14 Aug 2027, 15:30–17:00 (90 min) | Unit: A5 Useful Apps | Topic: Build helper - screen 2
Learning objective: By the end of this session, Yim can build helper - screen 2 — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build helper - screen 2." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build helper - screen 2" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build helper - screen 2" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build helper - screen 2 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build helper - screen 2" — one room / button / pattern — and bring it to the next session.
Session 193Combine sensor + LEDsSunday 15 Aug 2027
Date: Sunday 15 Aug 2027, 09:00–10:30 (90 min) | Unit: B4 Micro:bit Inventions | Topic: Combine sensor + LEDs
Learning objective: By the end of this session, Yim can combine sensor + leds — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, craft materials for housing the micro:bit if needed.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Combine sensor + LEDs." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Combine sensor + LEDs" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Combine sensor + LEDs" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The combine sensor + leds works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Combine sensor + LEDs" — one room / button / pattern — and bring it to the next session.
Session 194Build smart farmSunday 15 Aug 2027
Date: Sunday 15 Aug 2027, 11:00–12:30 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Build smart farm
Learning objective: By the end of this session, Yim can build smart farm — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build smart farm." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build smart farm" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build smart farm". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build smart farm works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build smart farm" — one room / button / pattern — and bring it to the next session.
Session 195Test helper appSunday 15 Aug 2027
Date: Sunday 15 Aug 2027, 13:30–15:00 (90 min) | Unit: A5 Useful Apps | Topic: Test helper app
Learning objective: By the end of this session, Yim can test helper app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test helper app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Test helper app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test helper app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test helper app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test helper app" — one room / button / pattern — and bring it to the next session.
Week 40 — 17 Aug 2027 to 22 Aug 2027
Session 196Automation challengeTuesday 17 Aug 2027
Date: Tuesday 17 Aug 2027, 15:30–17:00 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Automation challenge
Learning objective: By the end of this session, Yim can automation challenge — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Automation challenge." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Automation challenge" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Automation challenge". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The automation challenge works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Automation challenge" — one room / button / pattern — and bring it to the next session.
Session 197Useful app - Yim's own ideaSaturday 21 Aug 2027
Date: Saturday 21 Aug 2027, 15:30–17:00 (90 min) | Unit: A5 Useful Apps | Topic: Useful app - Yim's own idea
Learning objective: By the end of this session, Yim can useful app - yim's own idea — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Useful app - Yim's own idea." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Useful app - Yim's own idea" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Useful app - Yim's own idea" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The useful app - yim's own idea works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Useful app - Yim's own idea" — one room / button / pattern — and bring it to the next session.
Session 198Test inventionSunday 22 Aug 2027
Date: Sunday 22 Aug 2027, 09:00–10:30 (90 min) | Unit: B4 Micro:bit Inventions | Topic: Test invention
Learning objective: By the end of this session, Yim can test invention — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, craft materials for housing the micro:bit if needed.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test invention." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Test invention" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test invention" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test invention works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test invention" — one room / button / pattern — and bring it to the next session.
Session 199Improve automationSunday 22 Aug 2027
Date: Sunday 22 Aug 2027, 11:00–12:30 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Improve automation
Learning objective: By the end of this session, Yim can improve automation — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Improve automation." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Improve automation" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Improve automation". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The improve automation works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Improve automation" — one room / button / pattern — and bring it to the next session.
Session 200Build v1Sunday 22 Aug 2027
Date: Sunday 22 Aug 2027, 13:30–15:00 (90 min) | Unit: A5 Useful Apps | Topic: Build v1
Learning objective: By the end of this session, Yim can build v1 — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build v1." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build v1" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build v1" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build v1 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build v1" — one room / button / pattern — and bring it to the next session.
Week 41 — 24 Aug 2027 to 29 Aug 2027
Session 201Automation showcaseTuesday 24 Aug 2027
Date: Tuesday 24 Aug 2027, 15:30–17:00 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Automation showcase
Learning objective: By the end of this session, Yim can automation showcase — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Automation showcase." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Automation showcase" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Automation showcase". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The automation showcase works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Automation showcase" — one room / button / pattern — and bring it to the next session.
Session 202Build v2 - add featureSaturday 28 Aug 2027
Date: Saturday 28 Aug 2027, 15:30–17:00 (90 min) | Unit: A5 Useful Apps | Topic: Build v2 - add feature
Learning objective: By the end of this session, Yim can build v2 - add feature — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build v2 - add feature." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build v2 - add feature" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build v2 - add feature" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build v2 - add feature works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build v2 - add feature" — one room / button / pattern — and bring it to the next session.
Session 203Improve inventionSunday 29 Aug 2027
Date: Sunday 29 Aug 2027, 09:00–10:30 (90 min) | Unit: B4 Micro:bit Inventions | Topic: Improve invention
Learning objective: By the end of this session, Yim can improve invention — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, craft materials for housing the micro:bit if needed.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Improve invention." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Improve invention" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Improve invention" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The improve invention works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Improve invention" — one room / button / pattern — and bring it to the next session.
Session 204Review automation unitSunday 29 Aug 2027
Date: Sunday 29 Aug 2027, 11:00–12:30 (90 min) | Unit: M5 Coding Blocks & Automation | Topic: Review automation unit
Learning objective: By the end of this session, Yim can review automation unit — working, tested, and shown to Rica.
Materials: Minecraft Education (Code Builder / coding blocks), laptop/computer, paper + pencil for flow sketch, timer, screenshot tool. World: automation test world.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Review automation unit." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Review automation unit" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Review automation unit". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The review automation unit works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Session 205Test with family ideaSunday 29 Aug 2027
Date: Sunday 29 Aug 2027, 13:30–15:00 (90 min) | Unit: A5 Useful Apps | Topic: Test with family idea
Learning objective: By the end of this session, Yim can test with family idea — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test with family idea." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Test with family idea" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test with family idea" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test with family idea works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test with family idea" — one room / button / pattern — and bring it to the next session.
Week 42 — 31 Aug 2027 to 05 Sep 2027
Session 206Mega world - choose theme + planTuesday 31 Aug 2027
Date: Tuesday 31 Aug 2027, 15:30–17:00 (90 min) | Unit: M6 Mega Build Capstone | Topic: Mega world - choose theme + plan
Learning objective: By the end of this session, Yim can mega world - choose theme + plan — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Mega world - choose theme + plan." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Mega world - choose theme + plan" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Mega world - choose theme + plan". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The mega world - choose theme + plan works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Mega world - choose theme + plan" — one room / button / pattern — and bring it to the next session.
Session 207Polish useful appSaturday 04 Sep 2027
Date: Saturday 04 Sep 2027, 15:30–17:00 (90 min) | Unit: A5 Useful Apps | Topic: Polish useful app
Learning objective: By the end of this session, Yim can polish useful app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Polish useful app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Polish useful app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Polish useful app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The polish useful app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Polish useful app" — one room / button / pattern — and bring it to the next session.
Session 208Inventions showcaseSunday 05 Sep 2027
Date: Sunday 05 Sep 2027, 09:00–10:30 (90 min) | Unit: B4 Micro:bit Inventions | Topic: Inventions showcase
Learning objective: By the end of this session, Yim can inventions showcase — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, craft materials for housing the micro:bit if needed.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Inventions showcase." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Inventions showcase" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Inventions showcase" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The inventions showcase works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Inventions showcase" — one room / button / pattern — and bring it to the next session.
Session 209Start mega build - landSunday 05 Sep 2027
Date: Sunday 05 Sep 2027, 11:00–12:30 (90 min) | Unit: M6 Mega Build Capstone | Topic: Start mega build - land
Learning objective: By the end of this session, Yim can start mega build - land — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Start mega build - land." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Start mega build - land" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Start mega build - land". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The start mega build - land works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Start mega build - land" — one room / button / pattern — and bring it to the next session.
Session 210Fix bugsSunday 05 Sep 2027
Date: Sunday 05 Sep 2027, 13:30–15:00 (90 min) | Unit: A5 Useful Apps | Topic: Fix bugs
Learning objective: By the end of this session, Yim can fix bugs — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Fix bugs." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Fix bugs" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Fix bugs" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The fix bugs works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Fix bugs" — one room / button / pattern — and bring it to the next session.
Week 43 — 07 Sep 2027 to 12 Sep 2027
Session 211Build area 1Tuesday 07 Sep 2027
Date: Tuesday 07 Sep 2027, 15:30–17:00 (90 min) | Unit: M6 Mega Build Capstone | Topic: Build area 1
Learning objective: By the end of this session, Yim can build area 1 — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build area 1." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build area 1" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build area 1". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build area 1 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build area 1" — one room / button / pattern — and bring it to the next session.
Session 212Useful apps showcaseSaturday 11 Sep 2027
Date: Saturday 11 Sep 2027, 15:30–17:00 (90 min) | Unit: A5 Useful Apps | Topic: Useful apps showcase
Learning objective: By the end of this session, Yim can useful apps showcase — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Useful apps showcase." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Useful apps showcase" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Useful apps showcase" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The useful apps showcase works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Useful apps showcase" — one room / button / pattern — and bring it to the next session.
Session 213Choose + plan inventionSunday 12 Sep 2027
Date: Sunday 12 Sep 2027, 09:00–10:30 (90 min) | Unit: B5 Capstone Invention | Topic: Choose + plan invention
Learning objective: By the end of this session, Yim can choose + plan invention — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Choose + plan invention." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Choose + plan invention" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Choose + plan invention" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The choose + plan invention works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Choose + plan invention" — one room / button / pattern — and bring it to the next session.
Session 214Continue area 1Sunday 12 Sep 2027
Date: Sunday 12 Sep 2027, 11:00–12:30 (90 min) | Unit: M6 Mega Build Capstone | Topic: Continue area 1
Learning objective: By the end of this session, Yim can continue area 1 — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Continue area 1." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Continue area 1" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Continue area 1". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The continue area 1 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Continue area 1" — one room / button / pattern — and bring it to the next session.
Session 215Review Useful AppsSunday 12 Sep 2027
Date: Sunday 12 Sep 2027, 13:30–15:00 (90 min) | Unit: A5 Useful Apps | Topic: Review Useful Apps
Learning objective: By the end of this session, Yim can review useful apps — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for app plan, timer, list of real tasks / needs from Yim and family.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Review Useful Apps." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Review Useful Apps" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Review Useful Apps" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The review useful apps works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Week 44 — 14 Sep 2027 to 19 Sep 2027
Session 216Build area 2Tuesday 14 Sep 2027
Date: Tuesday 14 Sep 2027, 15:30–17:00 (90 min) | Unit: M6 Mega Build Capstone | Topic: Build area 2
Learning objective: By the end of this session, Yim can build area 2 — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build area 2." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build area 2" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build area 2". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build area 2 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build area 2" — one room / button / pattern — and bring it to the next session.
Session 217Capstone app - choose idea + planSaturday 18 Sep 2027
Date: Saturday 18 Sep 2027, 15:30–17:00 (90 min) | Unit: A6 Capstone App | Topic: Capstone app - choose idea + plan
Learning objective: By the end of this session, Yim can capstone app - choose idea + plan — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Capstone app - choose idea + plan." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Capstone app - choose idea + plan" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Capstone app - choose idea + plan" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The capstone app - choose idea + plan works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Capstone app - choose idea + plan" — one room / button / pattern — and bring it to the next session.
Session 218Build v1Sunday 19 Sep 2027
Date: Sunday 19 Sep 2027, 09:00–10:30 (90 min) | Unit: B5 Capstone Invention | Topic: Build v1
Learning objective: By the end of this session, Yim can build v1 — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build v1." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Build v1" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build v1" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build v1 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build v1" — one room / button / pattern — and bring it to the next session.
Session 219Continue area 2Sunday 19 Sep 2027
Date: Sunday 19 Sep 2027, 11:00–12:30 (90 min) | Unit: M6 Mega Build Capstone | Topic: Continue area 2
Learning objective: By the end of this session, Yim can continue area 2 — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Continue area 2." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Continue area 2" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Continue area 2". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The continue area 2 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Continue area 2" — one room / button / pattern — and bring it to the next session.
Session 220Design screens on paperSunday 19 Sep 2027
Date: Sunday 19 Sep 2027, 13:30–15:00 (90 min) | Unit: A6 Capstone App | Topic: Design screens on paper
Learning objective: By the end of this session, Yim can design screens on paper — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Design screens on paper." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Design screens on paper" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Design screens on paper" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The design screens on paper works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Design screens on paper" — one room / button / pattern — and bring it to the next session.
Week 45 — 21 Sep 2027 to 26 Sep 2027
Session 221Build area 3 + redstoneTuesday 21 Sep 2027
Date: Tuesday 21 Sep 2027, 15:30–17:00 (90 min) | Unit: M6 Mega Build Capstone | Topic: Build area 3 + redstone
Learning objective: By the end of this session, Yim can build area 3 + redstone — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build area 3 + redstone." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build area 3 + redstone" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build area 3 + redstone". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build area 3 + redstone works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build area 3 + redstone" — one room / button / pattern — and bring it to the next session.
Session 222Build screen 1Saturday 25 Sep 2027
Date: Saturday 25 Sep 2027, 15:30–17:00 (90 min) | Unit: A6 Capstone App | Topic: Build screen 1
Learning objective: By the end of this session, Yim can build screen 1 — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build screen 1." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build screen 1" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build screen 1" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build screen 1 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build screen 1" — one room / button / pattern — and bring it to the next session.
Session 223Add sensorSunday 26 Sep 2027
Date: Sunday 26 Sep 2027, 09:00–10:30 (90 min) | Unit: B5 Capstone Invention | Topic: Add sensor
Learning objective: By the end of this session, Yim can add sensor — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add sensor." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Add sensor" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add sensor" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add sensor works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add sensor" — one room / button / pattern — and bring it to the next session.
Session 224Continue area 3Sunday 26 Sep 2027
Date: Sunday 26 Sep 2027, 11:00–12:30 (90 min) | Unit: M6 Mega Build Capstone | Topic: Continue area 3
Learning objective: By the end of this session, Yim can continue area 3 — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Continue area 3." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Continue area 3" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Continue area 3". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The continue area 3 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Continue area 3" — one room / button / pattern — and bring it to the next session.
Session 225Build screen 2Sunday 26 Sep 2027
Date: Sunday 26 Sep 2027, 13:30–15:00 (90 min) | Unit: A6 Capstone App | Topic: Build screen 2
Learning objective: By the end of this session, Yim can build screen 2 — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build screen 2." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build screen 2" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build screen 2" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build screen 2 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build screen 2" — one room / button / pattern — and bring it to the next session.
Week 46 — 28 Sep 2027 to 03 Oct 2027
Session 226Build area 4Tuesday 28 Sep 2027
Date: Tuesday 28 Sep 2027, 15:30–17:00 (90 min) | Unit: M6 Mega Build Capstone | Topic: Build area 4
Learning objective: By the end of this session, Yim can build area 4 — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build area 4." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Build area 4" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build area 4". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build area 4 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build area 4" — one room / button / pattern — and bring it to the next session.
Session 227Build screen 3Saturday 02 Oct 2027
Date: Saturday 02 Oct 2027, 15:30–17:00 (90 min) | Unit: A6 Capstone App | Topic: Build screen 3
Learning objective: By the end of this session, Yim can build screen 3 — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Build screen 3." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Build screen 3" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Build screen 3" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The build screen 3 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Build screen 3" — one room / button / pattern — and bring it to the next session.
Session 228Add displaySunday 03 Oct 2027
Date: Sunday 03 Oct 2027, 09:00–10:30 (90 min) | Unit: B5 Capstone Invention | Topic: Add display
Learning objective: By the end of this session, Yim can add display — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add display." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Add display" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add display" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add display works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add display" — one room / button / pattern — and bring it to the next session.
Session 229Continue area 4Sunday 03 Oct 2027
Date: Sunday 03 Oct 2027, 11:00–12:30 (90 min) | Unit: M6 Mega Build Capstone | Topic: Continue area 4
Learning objective: By the end of this session, Yim can continue area 4 — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Continue area 4." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Continue area 4" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Continue area 4". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The continue area 4 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Continue area 4" — one room / button / pattern — and bring it to the next session.
Session 230Link screensSunday 03 Oct 2027
Date: Sunday 03 Oct 2027, 13:30–15:00 (90 min) | Unit: A6 Capstone App | Topic: Link screens
Learning objective: By the end of this session, Yim can link screens — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Link screens." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Link screens" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Link screens" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The link screens works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Link screens" — one room / button / pattern — and bring it to the next session.
Week 47 — 05 Oct 2027 to 10 Oct 2027
Session 231Add story + quests to mega worldTuesday 05 Oct 2027
Date: Tuesday 05 Oct 2027, 15:30–17:00 (90 min) | Unit: M6 Mega Build Capstone | Topic: Add story + quests to mega world
Learning objective: By the end of this session, Yim can add story + quests to mega world — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add story + quests to mega world." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Add story + quests to mega world" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add story + quests to mega world". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add story + quests to mega world works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add story + quests to mega world" — one room / button / pattern — and bring it to the next session.
Session 232Add data / listsSaturday 09 Oct 2027
Date: Saturday 09 Oct 2027, 15:30–17:00 (90 min) | Unit: A6 Capstone App | Topic: Add data / lists
Learning objective: By the end of this session, Yim can add data / lists — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add data / lists." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add data / lists" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add data / lists" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add data / lists works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add data / lists" — one room / button / pattern — and bring it to the next session.
Session 233Add buttonsSunday 10 Oct 2027
Date: Sunday 10 Oct 2027, 09:00–10:30 (90 min) | Unit: B5 Capstone Invention | Topic: Add buttons
Learning objective: By the end of this session, Yim can add buttons — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add buttons." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Add buttons" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add buttons" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add buttons works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add buttons" — one room / button / pattern — and bring it to the next session.
Session 234Continue mega worldSunday 10 Oct 2027
Date: Sunday 10 Oct 2027, 11:00–12:30 (90 min) | Unit: M6 Mega Build Capstone | Topic: Continue mega world
Learning objective: By the end of this session, Yim can continue mega world — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Continue mega world." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Continue mega world" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Continue mega world". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The continue mega world works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Continue mega world" — one room / button / pattern — and bring it to the next session.
Session 235Add sounds + imagesSunday 10 Oct 2027
Date: Sunday 10 Oct 2027, 13:30–15:00 (90 min) | Unit: A6 Capstone App | Topic: Add sounds + images
Learning objective: By the end of this session, Yim can add sounds + images — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add sounds + images." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add sounds + images" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add sounds + images" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add sounds + images works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add sounds + images" — one room / button / pattern — and bring it to the next session.
Week 48 — 12 Oct 2027 to 17 Oct 2027
Session 236Add automation to mega worldTuesday 12 Oct 2027
Date: Tuesday 12 Oct 2027, 15:30–17:00 (90 min) | Unit: M6 Mega Build Capstone | Topic: Add automation to mega world
Learning objective: By the end of this session, Yim can add automation to mega world — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add automation to mega world." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Add automation to mega world" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add automation to mega world". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add automation to mega world works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add automation to mega world" — one room / button / pattern — and bring it to the next session.
Session 237Add sensor / media featureSaturday 16 Oct 2027
Date: Saturday 16 Oct 2027, 15:30–17:00 (90 min) | Unit: A6 Capstone App | Topic: Add sensor / media feature
Learning objective: By the end of this session, Yim can add sensor / media feature — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Add sensor / media feature." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Add sensor / media feature" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Add sensor / media feature" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The add sensor / media feature works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Add sensor / media feature" — one room / button / pattern — and bring it to the next session.
Session 238Test v1Sunday 17 Oct 2027
Date: Sunday 17 Oct 2027, 09:00–10:30 (90 min) | Unit: B5 Capstone Invention | Topic: Test v1
Learning objective: By the end of this session, Yim can test v1 — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test v1." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Test v1" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test v1" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test v1 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test v1" — one room / button / pattern — and bring it to the next session.
Session 239Test automationSunday 17 Oct 2027
Date: Sunday 17 Oct 2027, 11:00–12:30 (90 min) | Unit: M6 Mega Build Capstone | Topic: Test automation
Learning objective: By the end of this session, Yim can test automation — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test automation." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Test automation" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test automation". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test automation works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test automation" — one room / button / pattern — and bring it to the next session.
Session 240Test full appSunday 17 Oct 2027
Date: Sunday 17 Oct 2027, 13:30–15:00 (90 min) | Unit: A6 Capstone App | Topic: Test full app
Learning objective: By the end of this session, Yim can test full app — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Test full app." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Test full app" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Test full app" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The test full app works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Test full app" — one room / button / pattern — and bring it to the next session.
Week 49 — 19 Oct 2027 to 24 Oct 2027
Session 241Detail + polish 1Tuesday 19 Oct 2027
Date: Tuesday 19 Oct 2027, 15:30–17:00 (90 min) | Unit: M6 Mega Build Capstone | Topic: Detail + polish 1
Learning objective: By the end of this session, Yim can detail + polish 1 — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Detail + polish 1." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Detail + polish 1" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Detail + polish 1". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The detail + polish 1 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Detail + polish 1" — one room / button / pattern — and bring it to the next session.
Session 242Playtest + make fix listSaturday 23 Oct 2027
Date: Saturday 23 Oct 2027, 15:30–17:00 (90 min) | Unit: A6 Capstone App | Topic: Playtest + make fix list
Learning objective: By the end of this session, Yim can playtest + make fix list — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Playtest + make fix list." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Playtest + make fix list" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Playtest + make fix list" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The playtest + make fix list works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Playtest + make fix list" — one room / button / pattern — and bring it to the next session.
Session 243Fix + improveSunday 24 Oct 2027
Date: Sunday 24 Oct 2027, 09:00–10:30 (90 min) | Unit: B5 Capstone Invention | Topic: Fix + improve
Learning objective: By the end of this session, Yim can fix + improve — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Fix + improve." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Fix + improve" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Fix + improve" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The fix + improve works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Fix + improve" — one room / button / pattern — and bring it to the next session.
Session 244Detail + polish 2Sunday 24 Oct 2027
Date: Sunday 24 Oct 2027, 11:00–12:30 (90 min) | Unit: M6 Mega Build Capstone | Topic: Detail + polish 2
Learning objective: By the end of this session, Yim can detail + polish 2 — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Detail + polish 2." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Detail + polish 2" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Detail + polish 2". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The detail + polish 2 works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Detail + polish 2" — one room / button / pattern — and bring it to the next session.
Session 245Fix top 3 bugsSunday 24 Oct 2027
Date: Sunday 24 Oct 2027, 13:30–15:00 (90 min) | Unit: A6 Capstone App | Topic: Fix top 3 bugs
Learning objective: By the end of this session, Yim can fix top 3 bugs — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Fix top 3 bugs." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Fix top 3 bugs" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Fix top 3 bugs" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The fix top 3 bugs works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Fix top 3 bugs" — one room / button / pattern — and bring it to the next session.
Week 50 — 26 Oct 2027 to 31 Oct 2027
Session 246Playtest mega worldTuesday 26 Oct 2027
Date: Tuesday 26 Oct 2027, 15:30–17:00 (90 min) | Unit: M6 Mega Build Capstone | Topic: Playtest mega world
Learning objective: By the end of this session, Yim can playtest mega world — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Playtest mega world." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Playtest mega world" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Playtest mega world". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The playtest mega world works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Playtest mega world" — one room / button / pattern — and bring it to the next session.
Session 247Polish designSaturday 30 Oct 2027
Date: Saturday 30 Oct 2027, 15:30–17:00 (90 min) | Unit: A6 Capstone App | Topic: Polish design
Learning objective: By the end of this session, Yim can polish design — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Polish design." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Polish design" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Polish design" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The polish design works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Polish design" — one room / button / pattern — and bring it to the next session.
Session 248PolishSunday 31 Oct 2027
Date: Sunday 31 Oct 2027, 09:00–10:30 (90 min) | Unit: B5 Capstone Invention | Topic: Polish
Learning objective: By the end of this session, Yim can polish — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Polish." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Polish" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Polish" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The polish works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Polish" — one room / button / pattern — and bring it to the next session.
Session 249Fix from playtestSunday 31 Oct 2027
Date: Sunday 31 Oct 2027, 11:00–12:30 (90 min) | Unit: M6 Mega Build Capstone | Topic: Fix from playtest
Learning objective: By the end of this session, Yim can fix from playtest — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Fix from playtest." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Fix from playtest" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Fix from playtest". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The fix from playtest works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Fix from playtest" — one room / button / pattern — and bring it to the next session.
Session 250Final testSunday 31 Oct 2027
Date: Sunday 31 Oct 2027, 13:30–15:00 (90 min) | Unit: A6 Capstone App | Topic: Final test
Learning objective: By the end of this session, Yim can final test — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Final test." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Final test" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Final test" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The final test works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Final test" — one room / button / pattern — and bring it to the next session.
Week 51 — 02 Nov 2027 to 07 Nov 2027
Session 251Final polishTuesday 02 Nov 2027
Date: Tuesday 02 Nov 2027, 15:30–17:00 (90 min) | Unit: M6 Mega Build Capstone | Topic: Final polish
Learning objective: By the end of this session, Yim can final polish — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Final polish." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Final polish" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Final polish". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The final polish works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Final polish" — one room / button / pattern — and bring it to the next session.
Session 252Prepare demoSaturday 06 Nov 2027
Date: Saturday 06 Nov 2027, 15:30–17:00 (90 min) | Unit: A6 Capstone App | Topic: Prepare demo
Learning objective: By the end of this session, Yim can prepare demo — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Prepare demo." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Prepare demo" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Prepare demo" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The prepare demo works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Prepare demo" — one room / button / pattern — and bring it to the next session.
Session 253Rehearse demoSunday 07 Nov 2027
Date: Sunday 07 Nov 2027, 09:00–10:30 (90 min) | Unit: B5 Capstone Invention | Topic: Rehearse demo
Learning objective: By the end of this session, Yim can rehearse demo — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Rehearse demo." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Rehearse demo" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Rehearse demo" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The rehearse demo works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Rehearse demo" — one room / button / pattern — and bring it to the next session.
Session 254Prepare showcaseSunday 07 Nov 2027
Date: Sunday 07 Nov 2027, 11:00–12:30 (90 min) | Unit: M6 Mega Build Capstone | Topic: Prepare showcase
Learning objective: By the end of this session, Yim can prepare showcase — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Prepare showcase." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Prepare showcase" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Prepare showcase". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The prepare showcase works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Prepare showcase" — one room / button / pattern — and bring it to the next session.
Session 255Rehearse demoSunday 07 Nov 2027
Date: Sunday 07 Nov 2027, 13:30–15:00 (90 min) | Unit: A6 Capstone App | Topic: Rehearse demo
Learning objective: By the end of this session, Yim can rehearse demo — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Rehearse demo." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Rehearse demo" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Rehearse demo" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The rehearse demo works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Rehearse demo" — one room / button / pattern — and bring it to the next session.
Week 52 — 09 Nov 2027 to 14 Nov 2027
Session 256Showcase rehearsalTuesday 09 Nov 2027
Date: Tuesday 09 Nov 2027, 15:30–17:00 (90 min) | Unit: M6 Mega Build Capstone | Topic: Showcase rehearsal
Learning objective: By the end of this session, Yim can showcase rehearsal — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Showcase rehearsal." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Showcase rehearsal" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Showcase rehearsal". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The showcase rehearsal works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Session 257Final fixesSaturday 13 Nov 2027
Date: Saturday 13 Nov 2027, 15:30–17:00 (90 min) | Unit: A6 Capstone App | Topic: Final fixes
Learning objective: By the end of this session, Yim can final fixes — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Final fixes." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Final fixes" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Final fixes" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The final fixes works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Final fixes" — one room / button / pattern — and bring it to the next session.
Session 258Final testSunday 14 Nov 2027
Date: Sunday 14 Nov 2027, 09:00–10:30 (90 min) | Unit: B5 Capstone Invention | Topic: Final test
Learning objective: By the end of this session, Yim can final test — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Final test." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Final test" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Final test" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The final test works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Final test" — one room / button / pattern — and bring it to the next session.
Session 259Final fixesSunday 14 Nov 2027
Date: Sunday 14 Nov 2027, 11:00–12:30 (90 min) | Unit: M6 Mega Build Capstone | Topic: Final fixes
Learning objective: By the end of this session, Yim can final fixes — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Final fixes." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Final fixes" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Final fixes". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The final fixes works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Final fixes" — one room / button / pattern — and bring it to the next session.
Session 260Showcase rehearsalSunday 14 Nov 2027
Date: Sunday 14 Nov 2027, 13:30–15:00 (90 min) | Unit: A6 Capstone App | Topic: Showcase rehearsal
Learning objective: By the end of this session, Yim can showcase rehearsal — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Showcase rehearsal." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Showcase rehearsal" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Showcase rehearsal" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The showcase rehearsal works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: Show the finished work to a parent / family member and tell them the 3 steps you used. No new build.
Week 53 — 16 Nov 2027 to 21 Nov 2027
Session 261Final showcase for parentsTuesday 16 Nov 2027
Date: Tuesday 16 Nov 2027, 15:30–17:00 (90 min) | Unit: M6 Mega Build Capstone | Topic: Final showcase for parents
Learning objective: By the end of this session, Yim can final showcase for parents — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Final showcase for parents." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Final showcase for parents" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Final showcase for parents". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The final showcase for parents works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Final showcase for parents" — one room / button / pattern — and bring it to the next session.
Session 262Final app showcase for parentsSaturday 20 Nov 2027
Date: Saturday 20 Nov 2027, 15:30–17:00 (90 min) | Unit: A6 Capstone App | Topic: Final app showcase for parents
Learning objective: By the end of this session, Yim can final app showcase for parents — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Final app showcase for parents." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Final app showcase for parents" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Final app showcase for parents" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The final app showcase for parents works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Final app showcase for parents" — one room / button / pattern — and bring it to the next session.
Session 263Final showcase for parentsSunday 21 Nov 2027
Date: Sunday 21 Nov 2027, 09:00–10:30 (90 min) | Unit: B5 Capstone Invention | Topic: Final showcase for parents
Learning objective: By the end of this session, Yim can final showcase for parents — working, tested, and shown to Rica.
Materials: Computer with MakeCode, micro:bit device + USB cable + battery pack, paper + pencil for invention plan, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Final showcase for parents." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the MakeCode blocks for "Final showcase for parents" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Final showcase for parents" in MakeCode. One main task only. Timer visible. Test on the simulator first, then on the micro:bit device if available. Rica helps only if he is stuck for 3 minutes.
- 65–80 min — Test & fix: Run the program on the simulator / device. Find one thing to fix. Fix it. Save the project and take a screenshot / photo of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The final showcase for parents works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Final showcase for parents" — one room / button / pattern — and bring it to the next session.
Session 264Celebration + next stepsSunday 21 Nov 2027
Date: Sunday 21 Nov 2027, 11:00–12:30 (90 min) | Unit: M6 Mega Build Capstone | Topic: Celebration + next steps
Learning objective: By the end of this session, Yim can celebration + next steps — working, tested, and shown to Rica.
Materials: Minecraft Education, laptop/computer, paper + pencil for mega-world plan, timer, screenshot tool, parent showcase checklist. World: Mega Build world, saved and backed up each session.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Celebration + next steps." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the key blocks / build for "Celebration + next steps" step by step, in Minecraft Education. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Celebration + next steps". One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Keep the build small enough to finish today.
- 65–80 min — Test & fix: Walk through / play the build in Minecraft. Find one thing to fix. Fix it. Save the world and take a screenshot of the working version.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The celebration + next steps works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Celebration + next steps" — one room / button / pattern — and bring it to the next session.
Session 265Celebration + next stepsSunday 21 Nov 2027
Date: Sunday 21 Nov 2027, 13:30–15:00 (90 min) | Unit: A6 Capstone App | Topic: Celebration + next steps
Learning objective: By the end of this session, Yim can celebration + next steps — working, tested, and shown to Rica.
Materials: Computer with MIT App Inventor, phone/tablet with Companion app, internet, paper + pencil for full app design, timer, demo script, parent showcase checklist.
Lesson plan — 90 minutes:
- 0–10 min — Welcome & plan: Recap last session in Yim's words. Show today's goal in one sentence: "Celebration + next steps." Plan on paper first — draw / list the 3 steps before touching the computer.
- 10–20 min — Demo: Rica shows the Designer + Blocks for "Celebration + next steps" step by step. Yim repeats the demo once, with Rica watching.
- 20–65 min — Build: Yim builds "Celebration + next steps" in MIT App Inventor. One main task only. Timer visible. Rica helps only if he is stuck for 3 minutes. Test with the Companion app as he goes.
- 65–80 min — Test & fix: Run the app on the phone/tablet with the Companion app. Find one thing to fix. Fix it. Save the project and take a screenshot of the working app.
- 80–90 min — Share & close: Yim shows what he made, says what worked and what to improve. Rica writes the report note from this. Agree the homework below.
Success check: The celebration + next steps works when tested, Yim can explain the 3 steps he used, and there is a saved screenshot / project to show.
Homework: One small task only: add one small improvement to "Celebration + next steps" — one room / button / pattern — and bring it to the next session.